Products | Alternergy

Shop

501 items found.

All Products

- 501 items

RESET

[ART2605] S4 Large Lateral Extension for S4 Vertical Extension

New!

Check Availability

S4 Large Lateral Extension for S4 Vertical Extension

S4 Large Lateral Extension for Vertical Extension

The S4 Large Lateral Extension is designed to extend the S4 Vertical Extension. This extension maintains a weather-resistant perimeter while integrating seamlessly with the mounting system.

Add to Cart

[ART2607] S4 Lateral Adaptors for Array Ends for S4 Vertical Extension

New!

Check Availability

S4 Lateral Adaptors for Array Ends for S4 Vertical Extension

The S4 Lateral Adaptors are mounting accessories designed to provide secure end-of-array support and connection in the S4 universal in-roof mounting system. These adaptors provide neat and stable attachment points at the ends of the photovoltaic (PV) array, ensuring consistent alignment and load distribution for the panel rows.

Add to Cart

[ART2603] S4 Lateral Adaptors for PV Array Ends

New!

Check Availability

S4 Lateral Adaptors for PV Array Ends

Add to Cart

New!

Check Availability

S4 PV Panel Support Pins

The S4 PV Panel Support Pins are designed to provide consistent support and positioning for solar photovoltaic (PV) panels during installation on S4 in-roof mounting systems. These support pins help maintain the correct panel spacing and alignment, thereby reducing stress on the array and facilitating load distribution.

Add to Cart

[ART2662] S4 Pre Compressed Seal Roll (5m)

New!

Check Availability

S4 Pre Compressed Seal Roll (5m)

The S4 pre-compressed seal roll (5m) is a high-performance EPDM sealing strip designed for use with S4 In-Roof mounting systems.
The roll provides a continuous, waterproof perimeter seal around the edges of a rooftop PV array where the flashing interfaces with roof tiles or other surfaces. The pre-compressed material expands slightly once installed, filling gaps and irregularities for enhanced weather resistance.

Roll Length: ~ 5 metres
Seal: EPDM rubber

Add to Cart

[ART2661] S4 Screw 6.5X25mm - EPDM - A2/Frame Fixing

New!

Check Availability

S4 Screw 6.5X25mm - EPDM - A2/Frame Fixing

A self-tapping fastening screw with EPDM designed for solar PV and structural frame fixing. It features:

Size: 6.5 × 25 mm - length suitable for frame fixing
Head: Hex for secure tightening
Seal: EPDM washer included - provides weatherproofing and sealing at the penetration point to reduce water ingress
Material: A2 stainless steel - corrosion-resistant grade for outdoor exposure

Add to Cart

[ART2660] S4 Screw 6.5X60mm - EPDM - A2 – Black

New!

Check Availability

S4 Screw 6.5X60mm - EPDM - A2 – Black

A self-tapping fastening screw designed for roof-integrated PV and related metal/aluminium installations. It features:

Size: 6.5 × 60 mm — suitable for fixing clamps, rails, brackets and other mounting hardware
Head & Finish: Black coated head for corrosion resistance and aesthetic match with black mounting components
Seal: EPDM washer included — provides weatherproofing and sealing at the penetration point to reduce water ingress
Material: A2 stainless steel — corrosion-resistant grade for outdoor exposure

Perfect for use with solar mounting clamps and frames where waterproof sealing is required.

Add to Cart

[ART2630] S4 Single Clamp Black with EPDM (H30)

New!

Check Availability

S4 Single Clamp Black with EPDM (H30)

This product is an H30 reinforced single clamp in black, which can be used to secure a PV panel frame to a mounting rail or structural frame.

Details:

Frame compatibility: Designed to fit a 30 mm panel frame thickness
Finish: Black (aesthetic & corrosion resistance)
Sealing: EPDM rubber pad to provide weatherproofing and protection between the clamp and panel frame

Add to Cart

[ART2631] S4 Single Clamp Black with EPDM (H35)

New!

Check Availability

S4 Single Clamp Black with EPDM (H35)

This product is an H35 reinforced single clamp in black, which can be used to secure a PV panel frame to a mounting rail or structural frame.

Details:

Frame compatibility: Designed to fit a 35 mm panel frame thickness
Finish: Black (aesthetic & corrosion resistance)
Sealing: EPDM rubber pad to provide weatherproofing and protection between the clamp and panel frame

Add to Cart

S4 Universal Mounting System Lateral Extension Small.webp

New!

Check Availability

S4 Small Lateral Extension

The S4 Small Lateral Extension is designed to extend the lateral flashing or frame support in S4 roof-integrated mounting systems. It provides longer coverage where standard lateral flashing pieces are insufficient, enabling more flexible and complete edge sealing around large PV arrays. This extension maintains a weather-resistant perimeter while integrating seamlessly with the mounting system.

Add to Cart

[ART2606] S4 Small Lateral Extension for S4 Vertical Extension

New!

Check Availability

S4 Small Lateral Extension for S4 Vertical Extension

S4 Small Lateral Extension for Vertical Extension

The S4 Small Lateral Extension is designed to extend the S4 Vertical Extension. This extension maintains a weather-resistant perimeter while integrating seamlessly with the mounting system.

Add to Cart

New!

Check Availability

S4 Universal Frame

The S4 Universal Frame is a key structural component in the S4 universal solar mounting system designed to support photovoltaic (PV) panels on a variety of roof types and installation scenarios. Manufactured from robust corrosion-resistant aluminium, the universal frame provides a rigid and reliable support structure for solar modules, ensuring optimal alignment, load distribution, and long-term durability.

The universal design simplifies installation and reduces inventory complexity by enabling compatibility across multiple roof profiles and PV module layouts within the S4 mounting platform. Its premium construction ensures it withstands harsh outdoor conditions while maintaining structural integrity over the lifetime of the solar installation.

Add to Cart

[ART2641] S4 Universal Lateral Flashing – Black

New!

Check Availability

S4 Universal Lateral Flashing – Black

S4 Universal Lateral Flashing - Black

The S4 Universal Lateral Flashing is a black aluminium finishing component designed to provide a weatherproof and aesthetically pleasing seal along the sides of a solar PV array. It protects the edges of the installation against water ingress and integrates seamlessly with the overall design to maintain durability and a professional finish.

Key Features:

Lateral Sealing Protection: Designed to seal the sides of the PV array and prevent water penetration.
Universal Compatibility: Works with all S4 in-roof frame types when used as lateral flashing.
Durable Construction: Made from weather-resistant aluminium with a sleek black finish.
Professional Appearance: Provides a seamless edge that enhances the visual finish of the PV installation.
Length: 1290mm

Add to Cart

New!

Check Availability

S4 Vertical Extension

The S4 Vertical Extension adapter provides additional height and optimises panel alignment.

Add to Cart

9 In Stock

SMA AC Overvoltage Protection Module Kit (type 2) for STP 50-40 (CORE1)

SMA AC Overvoltage Protection Module Kit (type 2)

In the CORE1 inverters protection can be retrofitted fast and cost-effectively thanks to this AC_SPD_KIT1-10 type II device that can be integrated.

The surge protection device can be retrofitted by connecting it to the standard plinth. The failure of an SPD module is detected by the inverter and displayed on screen as well as reported by the monitoring devices, if required.

Note: Only suitable for STP 50-40 (CORE1) inverters

Add to Cart

4 In Stock

SMA Communication Gateway

Communication Gateway for integration of RS485-wired PV systems into plant control and monitoring solutions with SMA Speedwire.

Add to Cart

8 In Stock

SMA DC Overvoltage Protection Module Kit (type 2) for STP 50-41 (CORE1)

SMA DC Overvoltage Protection Module Kit (type 2)

The DC Surge Protection Module Kit is a DC surge protection (type II) adaptor kit for the SMA Sunny Tripower Core1 (STP 50-41 inverters). DC surge protection is necessary to protect electrical equipment against voltage surges. Also called overvoltage and lightning is a well-known example of this. However, overvoltage protection creates potential equalisation which leads to neutralisation of the voltage differences. As a result, all connected solar panels and inverters remain undamaged. Type II only protects in the event of indirect lightning strikes.

Note: Only suitable for STP 50-41 inverters

Add to Cart

[SB4.0-1AV-41] SMA Sunny Boy SB 4.0 1AV-41 Inverter - with WiFi

2 In Stock

SMA Sunny Boy SB 4.0 1AV-41 Inverter - with WiFi

The Sunny Boy 3.0–6.0 ensures maximum energy yields for private homes. Thanks to its integrated web interface for easy commissioning via a smartphone or tablet and SMA Smart Connected service, this inverter offers true ease and comfort for PV system operators and installers.

New: With its integrated RS485 interface, the TS4-R module optimisers can be easily added into the system, with all communication and monitoring facilitated through the inverter.

Quick and easy to install: With its reduced weight (17.5Kg), the Sunny Boy can be installed quickly while taking up minimal space. The Sunny Boy can be commissioned quickly via smartphone or tablet thanks to its web interface.

Intelligent solar power generation: Established product features such as SMA ShadeFix and SMA Smart Connected are now supplemented with integrated TS4-R communication for module optimisation. The SMA ShadeFix integrated shade management system ensures maximum yields in light shade. Free online monitoring via Sunny Portal and Sunny Places Dynamic active power limitation means direct use of excess energy, less power from the grid

Flexibly expandable anytime:With the Sunny Boy, PV system operators can ensure that their PV system always generates maximum yields. If greater use of solar power is made in your own home, intelligent energy management and SMA storage solutions can be added at any time to systems with the Sunny Boy.

Please note:

This model includes the Wi-Fi Function.

Add to Cart

41 In Stock

SMA Sunny Home Manager 2.0

Maximum of 4 Inverters can be connected with the HM 2.0. For larger systems, please use the SMA Data Manager.

The control centre for smart energy management The Sunny Home Manager 2.0 is SMA’s intelligent energy manager and enables the most efficient use of solar energy in the home. It optimises PV self-consumption and significantly reduces electricity costs. To do this, it measures the power of PV generation, purchased electricity as well as grid feed-in, and gives an overview of all relevant energy flows in the household. By means of local PV generation forecasts and the measured household consumption profile, the self-learning device prompts the user with energy-related action recommendations. Operation of the controlled appliances is coordinated in a way to optimise the use of self-generated solar energy.

The path to intelligent energy management is easy. Simply install the Sunny Home Manager 2.0 at the grid connection point, connect it to the internet router using an Ethernet cable, then register the PV system in Sunny Portal or Sunny Places free of charge and benefit from greater energy efficiency.

The dimensions for the product: 70 mm x 88 mm x 65 mm.

KEY FEATURES:

Records the consumption profile of individual devices
Maximises the use of solar energy from photovoltaic systems and optimises self-consumption
Energy balance and consumption data can be viewed through the Sunny Portal and Sunny Places
Fast and easy plug & play installation at the grid connection point
Compatibility with cost-effective standard radio-controlled sockets facilitates control of simple loads
Optimized battery charging in SMA storage systems
Energy balance and load data shown in interactive diagrams
Integrated weather and PV forecast data

Add to Cart

20 In Stock

SMA Upgrade kit DC Overvoltage protection (type 2) for inputs A + B

SMA Upgrade kit DC overvoltage protection (type 2) for inputs A + B

SMA DC overvoltage protector (type II) for input A and B. For Sunny Tripower models STP 20000-30 / 25000TL-30

KEY FEATURES:

Max Continuous Operating Voltage: 1170VDC
Open Circuit Voltage: <970VDC
Short-Circuit Current Rating:1000A
Rated Load Current: 80A
Degree of Protection: IP20
Certified: EN 50539-11

Add to Cart

[DFS-14-W] Santon Firefighter Safety Switch, Unit with Cable Glands

Check Availability

Santon Firefighter Safety Switch, Unit with Cable Glands

Santon Fireman Safety Switch, with cable glands

In most photovoltaic systems, the DC isolator is integrated into the DC/AC power inverter. After switching off the DC isolator, the cables between the DC solar modules and DC/AC power inverter running through the building are still subject to up to 1000 V DC. In the event of a fire, firefighters are exposed to a very serious source of potential danger.

The Santon domestic firefighter safety switch (DFS) provides the solution. It directly disconnects the DC current in close proximity to the solar modules and creates a safer situation for firefighters.

The DFS is powered by a motorized X-type switch and can therefore be located directly at the PV modules. The DFS automatically switches off if the regular AC power is down and automatically switches on when the regular AC power is on again.

Santon ‘snap-action’ spring mechanism, with its response time of only 3 milliseconds, reduces the electric arc. In combination with the self-cleaning contacts, this increases durability and safety.

FEATURES:

2 Strings
4 Poles
2 MPPT
With cable glands 9 x M12
Easy to install for small to large, existing and new installations
Motor driven switch disconnect
Robust plastic enclosure IP65
Dimensions:
Height (mm): 105
Length (mm): 175
Width (mm): 210

Add to Cart

[388A915] Seaward PV 150 Solar Link Test Kit

Check Availability

Seaward PV 150 Solar Link Test Kit

Seaward PV150 Solar Link Test Kit

The fast and simple PV tester with I-V curve tracing

This Seaward Solar testing kit has all the required equipment to measure the electrical safety and performance of a solar PV system, along with irradiance, roof pitch & orientation and temperature. This solar test kit offers the complete solution to PV installation testing, assessing and commissioning.

Carries out all electrical tests as required by MCS and IEC 62446. It also stores and downloads up to 200 complete test records into certification software via USB interface.

KEY FEATURES:

All-in-one commissioning tests and I-V curve tracing
Ground (earth) continuity measurement with test lead null for long test-leads
PV string open circuit voltage measurement up to 1000V DC with polarity indication
PV string short circuit current measurement up to 15A DC
PV array insulation test at 250/500/1000V
Tests individual PV modules or strings
Memory for up to 200 records and USB download to PC (CSV file)
High contrast display, visible in bright light

THE KIT INCLUDES:

Seaward Solar Installation PV150 instrument
2 x MC4 test lead adaptors
2 x Combiner box test probes and detachable alligator clips (MC4)
2 x Test leads, with test probes and detachable alligator clips (4mm)
AC/DC current clamp
Solar Survey 200R irradiance meter and temperature probe
Solar Survey 200R mounting bracket
Rugged carry bag
Quick Start Guide
UKAS Calibration Certificate (PV150)
SolarCert PC Software
Free online product training and support
2 year warranty (register your product online)

Add to Cart

[389A915] Seaward PV200 Solar Link Test Kit

Check Availability

Seaward PV200 Solar Link Test Kit

A compact solar PV tester with I-V curve tracing

The PV200 is a compact & cost effective I-V curve tracer that uses simple push button operation making it an efficient and versatile tester for PV systems.

The tester measures ground (earth) continuity, open circuit voltage, short circuit current, maximum power point voltage, current and power (with AC/DC clamp). The instrument will also give you the fill factor of the PV module or system under test.

The PV200 has a separate 1kV insulation resistance test function, eliminating the need for a separate, expensive device. Meanwhile the high contrast display on the device is clearly visible in direct sunlight.

The unit can also wirelessly capture and record real-time irradiance, ambient temperature and PV module temperature from the Solar Survey 200R. Using the Solar Survey 200R your data can be converted to standard test conditions, in SolarCerts, for you to compare to the manufacturer’s published data.

KEY FEATURES:

All-in-one commissioning tests and I-V curve tracing
Automatic fill factor calculation
Ground (earth) continuity measurement with test lead null
PV string open circuit and maximum power point voltage measurements up to 1000V DC
PV string short current up to 15ADC
PV array insulation test at 250/500/1000V
Tests individual PV modules or strings
Carries out all electrical tests as required by MCS and IEC 62446
Memory for up to 999 records with USB download to PC
Instant NFC data transfer using the PVMobile app
High contrast display, visible in bright light

THE KIT INCLUDES:

1 x PV200 solar installation tester
1 x Solar Survey 200R irradiance meter
1 x AC/DC current clamp
1 x Rugged carry bag
2 x MC4 test lead adaptors
2 x combiner box test probes and detachable alligator clips (MC4)
2 x test leads with detachable alligator clips (4mm)
USB download cable
SolarCert Solar PV Reporting Software
UKAS Calibration Certificate (PV200)
Quick start guide
1 x Solar Survey 200R Calibration Certificate
Free online product training and support
2 year warranty (register your product online)

Add to Cart

963 In Stock

Solar PV on Roof Gloss White Vinyl Labels - 100mm x 100mm

One label on a sheet.
Each label is 100mm wide x 100mm deep with 3mm radius corners.

Add to Cart

[ASW100K-LT] Solplanet 100kW, 3ph 10MPPT Inverter, WiFi-Stick, With DC

2 In Stock

Solplanet 100kW, 3ph 10MPPT Inverter, WiFi-Stick, With DC

Solplanet ASW LT, 100kW, 3ph 10MPPT Inverter, WiFi-Stick, With DC

The powerful three-phase Solplanet ASW 75-110K LT Series is a flexible and reliable solution for commercial and industrial installations.

The ASW 100K-LT includes 10 independent MPP trackers and 32A rated input current per MPPT and is compatible with bifacial and latest large PV panels. Its 150% DC/AC sizing ratio allows for versatile system designs.

The IP66 certified waterproof design enables large-scale power production plants to maintain a steady production regardless of the environmental conditions, and Solplanet's ShadeSol integrated intelligent shadow management system keeps the installation at maximum capacity, even in shady conditions.

The inverter is equipped with the export active power limit function, so as to meet the grid standards for limiting the output power at the grid connection point.

KEY FEATURES:

Quick & easy-to-install with standard tools
10 MPPT for flexible solar panel design for higher efficiency
32A input current each MPPT, ideal for bifacial and large area PV modules
Wide MPP voltage range 200V-1000V – increased generation in low light conditions
Oversizing of solar panels by 150% for higher efficiency
SUNCLIX DC Plug-in connectors
Fuseless design
Built-in Type II surge protection device both DC & AC side
IP66 protection design for outdoor use
Easy commissioning with cloud-based Solplanet App
24/7 System monitoring with Solplanet Apps
ShadeSol shadow management system
Wi-Fi stick included
Compact wall mount design (bracket included)
5-Year warranty

Add to Cart

[ASW110K-LT] Solplanet 110kW, 3ph 10MPPT Inverter, WiFi-Stick, With DC

7 In Stock

Solplanet 110kW, 3ph 10MPPT Inverter, WiFi-Stick, With DC

The powerful three-phase Solplanet ASW 75-110K LT Series is a flexible and reliable solution for commercial and industrial installations.

The ASW 110K-LT includes 10 independent MPP trackers and 32A rated input current per MPPT and is compatible with bifacial and latest large PV panels. Its 150% DC/AC sizing ratio allows for versatile system designs.

The inverter is equipped with the export active power limit function, so as to meet the grid standards for limiting the output power at the grid connection point.

KEY FEATURES:

Quick & easy-to-install with standard tools
10 MPPT for flexible solar panel design for higher efficiency
32A input current each MPPT, ideal for bifacial and large area PV modules
Wide MPP voltage range 200V-1000V – increased generation in low light conditions
Oversizing of solar panels by 150% for higher efficiency
SUNCLIX DC Plug-in connectors
Fuseless design
Built-in Type II surge protection device both DC & AC side
IP66 protection design for outdoor use
Easy commissioning with cloud-based Solplanet App
24/7 System monitoring with Solplanet Apps
ShadeSol shadow management system
Wi-Fi stick included
Compact wall mount design (bracket included)
5-Year warranty

Add to Cart

[ASW5K-LT G2 Pro] Solplanet 5.0kW, 3ph 2MPPT Inverter, WiFi-Stick, With DC

6 In Stock

Solplanet 5.0kW, 3ph 2MPPT Inverter, WiFi-Stick, With DC

Solplanet ASW LT G2 Pro, 5.0kW, 3ph 2MPPT Inverter, WiFi-Stick, With DC

The ASW 3-10K LT-G2 Pro three-phase string inverter series delivers the latest innovations for residential and commercial use.

The inverters include 2 independent MPP trackers and up to 20A rated input current per MPPT. They are perfectly compatible with high power, bifacial and larger size wafer-based solar panels. A wide MPPT range with 150% oversizing of the PV power array ensures high energy yield and flexibility in nearly every application.

Solplanet’s cloud-based app provides user-friendly, quick setup and easy commissioning features.

KEY FEATURES:

Quick & easy-to-install with standard tools
Compact wall mount design (bracket included)
Max 20A input current, ideal for bifacial and large area PV modules
Wide MPP voltage range 150V-1000V with low start up voltage – increased generation in low light conditions
150 % PV array oversizing for higher yields
SUNCLIX DC Plug-in connectors
Built-in Type II surge protection device both DC & AC side
IP66 protection design for outdoor use
Easy commissioning & monitoring with cloud-based Solplanet app
Wi-Fi stick included
10-Year warranty

Add to Cart

[ASW 80K-LT] Solplanet 80kW, 3ph 8MPPT Inverter, WiFi-Stick, With DC

1 In Stock

Solplanet 80kW, 3ph 8MPPT Inverter, WiFi-Stick, With DC

Solplanet ASW LT, 80kW, 3ph 8MPPT Inverter, WiFi-Stick, With DC

The powerful three-phase Solplanet ASW 75-110K LT Series is a flexible and reliable solution for commercial and industrial installations.

The ASW 80K-LT includes 8 independent MPP trackers and 32A rated input current per MPPT and is compatible with bifacial and latest large PV panels. Its 150% DC/AC sizing ratio allows for versatile system designs.

The inverter is equipped with the export active power limit function, so as to meet the grid standards for limiting the output power at the grid connection point.

KEY FEATURES:

Quick & easy-to-install with standard tools
8 MPPT for flexible solar panel design for higher efficiency
32A input current each MPPT, ideal for bifacial and large area PV modules
Wide MPP voltage range 200V-1000V – increased generation in low light conditions
Oversizing of solar panels by 150% for higher efficiency
SUNCLIX DC Plug-in connectors
Fuseless design
Built-in Type II surge protection device both DC & AC side
IP66 protection design for outdoor use
Easy commissioning with cloud-based Solplanet App
24/7 System monitoring with Solplanet Apps
ShadeSol shadow management system
Wi-Fi stick included
Compact wall mount design (bracket included)
5-Year warranty

Add to Cart

[32.6126] Staubli Installer Tool Case Set for MC4 and MC4-EVO2

New!

Check Availability

Staubli Installer Tool Case Set for MC4 and MC4-EVO2

Staubli | Alternergy

Staubli Installer Tool Case Set for MC4 and MC4-EVO2

All the tools specifically designed for professional installation of the entire Original MC4 product family. Configured for 4/6/10 mm² open crimp contacts.

Consisting of (see image above):

1	32.0716	PV-BVK4	Sealing caps socket (10 pcs.)
2	32.0717	PV-SVK4	Sealing caps plug (10 pcs.)
3	32.6028	PV-PST	MC4 test plug
4	32.6073	PV-EVO-PST	MC4‑Evo 2 test plug
5	32.6066	PV-MS-MC4‑Evo 2	MC4‑Evo 2 unlocking tool
6	32.6080	PV-WZ-KS	Cable cutter
7	32.0065	PV-WZ-TORQUE-SET	Torque tool set
8	32.6020-60100	PV-CZM-60100	MC4 and MC4‑Evo 2 crimping pliers
8.1	32.6081	PV-LOC-MC4	MC4 locator
8.2	32.6083	PV-LOC-MC4‑Evo 2	MC4‑Evo 2 locator
9	32.6027-410	PV-AZM-410	Stripping pliers
10	32.6058	PV-MS-PLS	MC4 and MC4‑Evo 2 open-end spanner set

Add to Cart

614 In Stock

Staubli MC4 Connector Female (10 mm²)

The Staubli Multi-Contact PV Plug connector permits pre-assembly of the PV modules at the site or workshop.

This connector is compatible with 10 mm² section cables having an overall diameter between 5.9 and 8.8 mm.

Add to Cart

Check Availability

Staubli MC4 Connector Male (10 mm²)

The Staubli Multi-Contact PV Plug connector permits pre-assembly of the PV modules at the site or workshop.

This connector is compatible with 10 mm² section cables having an overall diameter between 5.9 and 8.8 mm.

Add to Cart

2 In Stock

Staubli MC4 Crimp Free Assembly tool MC4-Evo ready

This tool is an open-end spanner set specifically designed for the assembly and maintenance of Staubli's MC4-Evo ready photovoltaic connectors. The set includes two durable plastic spanners, specifically crafted for MC4-Evo ready connectors, making installation and maintenance fast and easy.

Add to Cart

1055 In Stock

Staubli MC4 Crimp Free Connector MC4-Evo ready Female (4-6mm)

This connector is a high-performance MC4-Evo ready female cable connector, and Featuring a crimp-free, tool-free assembly designed for fast and reliable (PV) installations. Rated for 1500V DC and 30A

FEATURES:

Cable cross-section: 4-6 mm²
Rated current: 30 A
Rated voltage: DC 1500 V
Type of connection: Spring clip (tool-free connection)
Fire protection class : UL94-V0
TÜV-Rheinland certified

Add to Cart

1045 In Stock

Staubli MC4 Crimp Free connector MC4-Evo ready Male (4-6mm)

This connector is a high-performance MC4-Evo ready male cable connector, and Featuring a crimp-free, tool-free assembly designed for fast and reliable (PV) installations. Rated for 1500V DC and 30A

FEATURES:

Cable cross-section: 4-6 mm²
Rated current: 30 A
Rated voltage: DC 1500 V
Type of connection: Spring clip (tool-free connection
Fire protection class : UL94-V0
TÜV-Rheinland certified

Add to Cart

5 In Stock

Staubli MC4 Crimping pliers 2.5/4/6mm²

Suitable for the assembly of products approved by TÜV in small amounts. Simple crimping tool without locator and without spare parts (not possible to replace the inserts). Crimp cycles : 30’000 cycles guaranteed Complete tool for the assembly of the original MC4.

Note: This tool is not suitable for MC4-Evo2 connectors. Its for standard MC4 only

Add to Cart

[PV-KST4-EVO 2/6II-UR] Staubli MC4 EVO2 Connector Male (4-6mm²)

524 In Stock

Staubli MC4 EVO2 Connector Male (4-6mm²)

The MC4-Evo2 is the latest addition to the Multi-Contact Stäubli PV connector portfolio. Great for high voltage applications, these new connectors are internationally certified and are approved for 1500 V DC (IEC, JET), 1000 V DC (UL) unrestricted access.

MC4-Evo2 connectors are suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68). MC4 crimping tools can be used.

Add to Cart

[PV-KBT4-EVO 2A/6II] Staubli MC4 Evo 2A Female Connector (4-6mm²)

3304 In Stock

Staubli MC4 Evo 2A Female Connector (4-6mm²)

Staubli MC4 Evo 2A Female Connector (4-6mm², Cable Outer Diameter 6.4-8.4 mm)

The MC4-Evo 2 is the latest addition to the Multi-Contact Stäubli PV connector portfolio. Great for high voltage applications, these new connectors are internationally certified and are approved for 1500 V DC (IEC, JET), 1500 V DC (UL) unrestricted access.

MC4-Evo 2 connectors are suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray.

FEATURES:

Snap-in lock
MULTILAM technology
Cable cross-section: 4-6 mm²
Female cable coupler
Cable outer diameter: 6.4-8.4 mm
Rated current: 45A 4mm² cable ; 53A 6mm² cable
Rated voltage: 1500V
Termination type: Crimping
IP Protection: IP68
Flame class: UL94-V0
TÜV-Rheinland certified

Add to Cart

[PV-KST4-EVO 2A/6II] Staubli MC4 Evo 2A Male Connector (4-6mm²)

3683 In Stock

Staubli MC4 Evo 2A Male Connector (4-6mm²)

Staubli MC4 Evo 2A Male Connector (4-6mm², Cable Outer Diameter 6.4-8.4 mm)

The MC4-Evo 2 is the latest addition to the Multi-Contact Stäubli PV connector portfolio. Great for high voltage applications, these new connectors are internationally certified and are approved for 1500 V DC (IEC, JET), 1500 V DC (UL) unrestricted access.

MC4-Evo 2 connectors are suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray.

FEATURES:

Snap-in lock
MULTILAM technology
Cable cross-section: 4-6 mm²
Male cable coupler
Cable outer diameter: 6.4-8.4 mm
Rated current: 45A 4mm² cable ; 53A 6mm² cable
Rated voltage: 1500V
Termination type: Crimping
IP Protection: IP68
Flame class: UL94-V0
TÜV-Rheinland certified

Add to Cart

[PV-KBT4/6II-UR] Staubli MC4 Female Connector (4-6mm²)

721 In Stock

Staubli MC4 Female Connector (4-6mm²)

The Multi-Contact PV Plug connector system permits pre-assembly of the PV modules at the site or workshop. This allows equipment from the inverter to the module to be installed quickly by skilled the installers.

These connectors require the correct crimping tool to ensure a solid connection to the field cable. We can supply the relevant tools if required.

As an alternative, the MC4Evo2 is a new addition to the MC4 range by Staubli, addressing the higher voltage output of the new, larger modules. The Evo2 model is almost identical in function and installation as the previous model, but is rated at 1500 Volts which is common for the larger 350+ W modules in the market today.

FEATURES:

Snap-in lock
MULTILAM technology
Cable cross-section: 4-6 mm²
Female cable coupler
Rated current: 39A (4mm²/6mm² cables)
Rated voltage: 1000V
Termination type: Crimping
Flame class: UL94-V0
TÜV-Rheinland certified

Add to Cart

[PV-KST4/6II-UR] Staubli MC4 Male Connector (4-6mm²)

1293 In Stock

Staubli MC4 Male Connector (4-6mm²)

These connectors require the correct crimping tool to ensure a solid connection to the field cable. We can supply the relevant tools if required.

FEATURES:

Snap-in lock
MULTILAM technology
Cable cross-section: 4-6 mm²
Male cable coupler
Rated current: 39A (4mm²/6mm² cables)
Rated voltage: 1000V
Termination type: Crimping
Flame class: UL94-V0
TÜV-Rheinland certified

Add to Cart

6 In Stock

Staubli MC4 Open-end Plastic Spanner Set PV-MS (set of 2)

Staubli MC4 Open-end Spanner Set PV-MS (set of 2)

These spanner tools are used for assembly of Staubli MC4 connectors only. They can be used for disconnecting a mated pair of locked connectors, tightening cable glands, and securing the connector.

Not suitable for EVO2 connectors.
Material: Plastic.

Note: Tool colour may vary

Add to Cart

2 In Stock

Staubli MC4&MC4-EVO2 Open-end Metal Spanner Set (set of 2)

Staubli MC4 & MC4-EVO2 Open-end Metal Spanner Set (set of 2)

These spanner tools are used for assembly of Staubli MC4 and MC4-Evo2 connectors. They can be used for disconnecting a mated pair of locked connectors, tightening cable glands, and securing the connector.

Suitable for EVO2 connectors
Plus carrying pouch
Material: High-quality Metal

Note: Tool colour may vary

Add to Cart

[32.0196] Staubli MC4-Evo 2 Female Branch Connector (4-6mm²)

340 In Stock

Staubli MC4-Evo 2 Female Branch Connector (4-6mm²)

Staubli MC4-Evo 2 Female Branch Connector

World's first dual certified DC 1500 V branch connector.

Stäubli MC4-Evo 2 Branch Connectors are 2 to 1 connectors that allow for a safe and simple parallel or serial-parallel connection of PV modules.

Available in either 2 female to 1 male, or 2 male to 1 female, and pluggable with single-pole MC4 and MC4-Evo 2 connectors.

Staubli MC4s are often viewed as the standard connector in the solar energy industry.

FEATURES:

Plug-and-play: no crimping or torqueing necessary
Versatility and compact dimensions
Mating compatibility with original MC4 and MC4-Evo 2 cable connectors
DC 1500 V according to IEC 62852 and UL 6703
Resistance to salt mist spray
Proven MULTILAM Technology with high long-term stability which ensures consistently low performance loss throughout the entire service life of the connector
IP68 rating

Note: Branch connectors must not be connected directly to panel receptacles of inverters.

Add to Cart

[32.0197] Staubli MC4-Evo 2 Male Branch Connector (4-6mm²)

134 In Stock

Staubli MC4-Evo 2 Male Branch Connector (4-6mm²)

Staubli MC4-Evo 2 Male Branch Connector

World's first dual certified DC 1500 V branch connector.

Stäubli MC4-Evo 2 Branch Connectors are 2 to 1 connectors that allow for a safe and simple parallel or serial-parallel connection of PV modules.

Available in either 2 male to 1 female, or 2 female to 1 male, and pluggable with single-pole MC4 and MC4-Evo 2 connectors.

Staubli MC4s are often viewed as the standard connector in the solar energy industry.

FEATURES:

Plug-and-play: no crimping or torqueing necessary
Versatility and compact dimensions
Mating compatibility with original MC4 and MC4-Evo 2 cable connectors
DC 1500 V according to IEC 62852 and UL 6703
Resistance to salt mist spray
Proven MULTILAM Technology with high long-term stability which ensures consistently low performance loss throughout the entire service life of the connector
IP68 rating

Note: Branch connectors must not be connected directly to panel receptacles of inverters.

Add to Cart

200 In Stock

Staubli Sealing cap Female

Stäubli MC4 and MC4-Evo 2 sealing cap for female connectors protects cable couplers when unplugged.

Add to Cart

162 In Stock

Staubli Sealing cap Male

Stäubli MC4 and MC4-Evo 2 sealing cap for male connectors protects cable couplers when unplugged.

Add to Cart

[SUNGO GTC] Sungo Gateway Controller for C&I Scenario (connecting up to 200 units)

New!

5 In Stock

Sungo Gateway Controller for C&I Scenario (connecting up to 200 units)

The SUNGO GT Data Gateway is designed to support system and module-level monitoring of solar PV systems. It enables the collection of operating data and allows system performance to be viewed remotely via the SUNGO monitoring platform.

With support for a higher number of input strings and connected devices, the GTC is suitable for larger PV installations. It provides stable data transmission and supports remote monitoring via smartphone or computer.

FEATURES:

Real-Time Performance Insight
Comprehensive Multi-System Integration
Intelligent Remote Control Hub
Communication with optimizer: PLC
Communication with upper machine: 2.4GHz Wi-Fi / RS485
Dimension (WxDxH): 140 x 33.5 x 175mm
12-year warranty

Add to Cart

[SUNGO GT] Sungo Gateway Controller for Residential Scenario (connecting up to 40 units)

New!

4 In Stock

Sungo Gateway Controller for Residential Scenario (connecting up to 40 units)

Compatible with multiple devices, facilitates remote monitoring via smartphone or computer.

FEATURES:

Real-Time Performance Insight
Comprehensive Multi-System Integration
Intelligent Remote Control Hub
Communication with optimizer: PLC
Communication with upper machine: 2.4GHz Wi-Fi / RS485
Dimension (WxDxH): 140 x 33.5 x 175mm
12-year warranty

Add to Cart

[SUNGO OPT PRO 800W] Sungo Optimiser (standalone) - 800W

New!

100 In Stock

Sungo Optimiser (standalone) - 800W

The Sungo Opt Pro optimiser is a high-performance, module-level MPPT optimisation solution designed to improve the performance of PV modules.

Designed for flexible use with a wide range of mainstream PV modules and inverters, it is ideal for new installations or system upgrades.

The Sungo Optimiser supports high-power PV modules up to 800W and offers high efficiency.

KEY FEATURES:

Easy installation
MPPT voltage range: 7–60 V
Supports PV modules up to 800 W
Advanced MPPT algorithm
Optimises power generation
Dimensions (W × D × H): 103 x 21.3 x 105.3m
25-year warranty

Add to Cart

[SUNGO iOPT 800W] Sungo Optimiser + Rapid Shutdown + Monitoring - 800W

New!

88 In Stock

Sungo Optimiser + Rapid Shutdown + Monitoring - 800W

The Sungo optimiser is a high-performance, module-level MPPT optimisation solution designed to improve the performance of PV modules.

Designed for flexible use with a wide range of mainstream PV modules and inverters, it is ideal for new installations or system upgrades. When used with the Sungo data gateway, it enables module-level monitoring and automatic rapid shutdown functionality for enhanced safety.

KEY FEATURES:

Easy installation
MPPT voltage range: 7–60 V
Rapid shutdown functionality
Supports PV modules up to 800 W
Advanced MPPT algorithm
Optimises power generation
Dimensions (W × D × H): 103 × 21.3 × 105.3 mm
25-year warranty

Add to Cart

[BB002862] Sungrow 1 Phase Energy Meter S100

9 In Stock

Sungrow 1 Phase Energy Meter S100

Sungrow S100 is a single phase energy meter that offers high quality accurate meters.

KEY FEATURES:

Class 1 measurement accuracy
Nominal voltage : 240 Vac
Max. Operating Current: 100A
Communication: RS485
Mounting Type: DIN rail 35mm
IP20 rating (indoor)
Dimension (W/H/D): 18/117/65mm

Add to Cart

[SG10RT-P2-V11] Sungrow 10kW 3-Phase Optimised String Inverter

New!

Check Availability

Sungrow 10kW 3-Phase Optimised String Inverter

Sungrow | Alternergy

Sungrow 10kW 3-Phase Optimised String Inverter

The SG10RT-P2-V11 is a high-performance 10 kW three-phase grid-tied solar inverter from Sungrow, designed for commercial and large residential PV systems. It delivers reliable, high-efficiency power conversion while maximizing energy yield across a wide operating range.

Equipped with advanced MPPT technology, smart monitoring, and comprehensive protection features, the SG10RT-P2-V11 ensures stable performance even under variable conditions.

KEY FEATURES:

Compact & Lightweight Design
Dual MPP trackers
European Efficiency: 97.9%
Surge protection: DC Type II / AC Type II
Arc fault circuit interrupter (AFCI)
DC Switch
Built-in PID recovery function
Sungrow optimiser compatible
Communication: WLAN, Ethernet, RS485, DI, DO
Dimensions (WxHxD): 370x480x195 mm
IP65 protection
Weight: 18kg
Dongle included
MCS Certified
10-year warranty

Add to Cart

15 In Stock

Sungrow 125kW P2 Inverter

The Sungrow SG125CX-P2 string inverter ideal for commercial systems. The increased amount of 12 MPPTs allows better and more flexible solar power plant design. This inverter is easy for one person to install. It’s compatible with high-power modules and provides more safety due to AFCI 2.0 technology. Durable, high-quality fans ensure the perfect operating temperature at any time.

KEY FEATURES:

Dynamic shading optimization mode
12 MPPTs with max. efficiency 98.5%
Grid fault record function, easy for remote O&M
Key component diagnosis and protection
Compatible max. 240mm² Al AC cables
Compatible with over 500Wp+ PV module
Drawer-style cable sealing plate support AC cable pre-assembly
DC Type I+II SPD, AC Type II SPD
IP66 protection and C5 Anti-corrosion
Support AFCI 2.0 function
Max efficiency 98.5%
Smart IV Curve Diagnosis
G99 Certified
5-year warranty

Add to Cart

[SG125CX-P2-V21] Sungrow 125kW P2 Optimised Inverter

New!

2 In Stock

Sungrow 125kW P2 Optimised Inverter

The Sungrow SG125CX-P2-V21 is an optimised 125kW string inverter ideal for commercial systems. The increased amount of 12 MPPTs allows better and more flexible solar power plant design. This inverter is easy for one person to install. It’s compatible with high-power modules and provides more safety due to AFCI 2.0 technology. It`s Durable, smart forced air cooling system ensure the perfect operating temperature at any time.

KEY FEATURES:

Dynamic shading optimization mode
12 MPPTs with max. efficiency 98.5%
Grid fault record function, easy for remote O&M
Key component diagnosis and protection
Compatible max. 240mm² Al AC cables
Compatible with over 500Wp+ PV module
Drawer-style cable sealing plate support AC cable pre-assembly
DC Type I+II SPD, AC Type II SPD
IP66 protection and C5 Anti-corrosion
Support AFCI 2.0 function
Max efficiency 98.5%
Smart IV Curve Diagnosis
G99 Certified
5-year warranty

Add to Cart

Check Availability

Sungrow 12kW 3 Phase String Inverter

The Sungrow 3-phase String Inverter has more power, more functions, and less needed space. Relative to its functions, the 3-phase PV inverter is very compact and easy to install. The perfect solution for bigger rooftops.

With its spacially efficient design and unique push-in connectors, this product is made to be accessible and user friendly.

KEY FEATURES:

Dual MPP trackers
Maximum Input Current: 37.5A
European Efficiency: 97.9%
IP65 protection
Built-in PID recovery function
Natural cooling
Communication: WLAN, Ethernet, RS485, DI, DO
Weight: 18kg
10-year warranty

Add to Cart

Check Availability

Sungrow 150kW P2 Inverter (A0SG0179)

Sungrow | Alternergy

Sungrow 150kW P2 Inverter

The Sungrow SG150CX is a powerful on-grid inverter designed for commercial and industrial (C&I) applications. It features up to 7 MPPTs to maximise energy yield across different panel orientations and shading conditions, delivering high efficiency and stable 3-phase output.

Advanced technologies such as Smart IV Curve Diagnosis, AFCI 3.0 arc-fault protection, integrated surge protection, and intelligent air-cooling enhance safety and reliability. With remote monitoring capabilities and robust IP66 protection, this transformerless inverter ensures dependable performance in demanding environments.

KEY FEATURES:

150 kW three-phase on-grid string inverter
Up to 7 MPPTs for maximum energy harvest
High efficiency (up to 98.8%)
AFCI 3.0 arc-fault circuit protection
Smart IV Curve Diagnosis for advanced monitoring
Integrated surge protection (SPD Type II)
Intelligent forced air-cooling system
IP66 rated enclosure for outdoor installation
Remote monitoring and communication options
G99 Certified
5-year warranty

Add to Cart

Filters

Shop

All Products

Categories

Brand

Panel Power Range

Power Class

Popular Features

Watts/ m²

Frame Colour

Backsheet

High / Low Voltage Battery

Battery / System Model

Inverter Phase

Inverter Power Range (kW)

Protection Rating (IP)

Components

Clamp Size (mm)

Rail Type

Rail Length (m)

Nuts / Bolts / Washers Type

Panel Orientation

Panel Cell Size

Colour

Number of Isolator Poles

Rated Current (A)

Module Power Range (W)

EV Charger Type

EV Output Power

EV Connector Type

EV Phases

EV Output Current

Accessory Phase

CT Primary (A)

Conductor Size (mm²)

Cable Length (m)

Solar Connector Type

Colour

Cells

Module Efficiency (%)

Open Circuit Voltage - Voc (V)

Short Circuit Current - Isc (A)

Connector Type

Panels per Pallet

Panels per Container

MCS No

Rated Power (W)

Max DC Power (W)

Total No. of Strings

No. of MPP Trackers

MPPT Voltage Range / Rated Input Voltage (V)

Start-up Input Voltage (V)

Max. Input Voltage (V)

Max. input current per MPPT

European Efficiency (%)

Integrated DC Switch

Inverter IP Rating

Depth (mm)

Length (mm)

Height (mm)

Width (mm)

Grid Connection Standards (G98/G99/G100)

Thickness (mm)

Battery End User

Battery Cell Type

Battery Nominal Capacity (kWh)

Charge/Discharge Rate

Battery Usable Capacity (kWh)

Depth Of Discharge (%)

Grid Connection

Rail Height (mm)

Rail Width (mm)

Bolts/Screws Length (mm)

Bolts/Nuts/Screws Thread Diameter (mm)

Module Power (W)

Component Type

Warranty Period

Performance Warranty

Dimensions (W x H x D) mm

Product Weight (Kg)