Solar PV Accessories

ArcBox Batten Mount for Tile, battens 22-25mm thickness - box of 12

These brackets fit Viridian's ArcBox enclosure securely to a roof tile batten. The ArcBox enclosure simply snaps around a DC connector to reduce the risk that an arc-fault situation develops into a damaging fire. 

For roof-integrated solar systems, a batten bracket hooks over tile battens to hold the ArcBox in the batten space behind the solar panels or solar tiles.

Specification:

• Box of 12 Units
• Design to fit tile battens 22-25mm thick
• UK-based Manufacturer
• 10-year warranty

ArcBox Solar Connector Enclosure - Single Unit

The ArcBox - reducing fire risks in Solar PV

The number of solar installations is growing fast and with it the risk that mistakes assembling DC connectors lead to fires.

The ArcBox enclosure simply snaps around a DC connector to ensure that if an arc ever occurs it is safely contained and doesn't spread to combustible materials in or around the solar installation. The effectiveness of the product has been independently verified by the KIWA fire test laboratory and Loughborough University.

Ideally, use it on the manually crimped connector - two per string

Specification:

• High Temperature Refractory Lining Material
• DC Connector
• Hinged Outer Casing
• Cable Grommet
• Ventilation and Drainage Port
• Snap fit Catch
• Dimension (L/W/H) : 150 / 50 / 48mm
• Ambient Temperature: -40 +85 ºC
• Conductor Size: 4 mm2
• Certification: Independently tested by KIWA in accordance with NEN 6063 and with >5 minutes arcing without spread of fire to surrounding roofing materials.
  Independently confirmed by the University of Loughborough Department of Engineering that temperature under load remains within connector manufacturer's guidelines.

Battery Hazard label 70mm x 85mm (6 x DC Supply)

 
Set of 6 labels on a sheet.
Each label is 70mm wide x 85mm deep with 2mm radius corners.

Battery Hazard label Li-ion (230mm x 90mm)

One label on a sheet.
Each label is 230mm wide x 90mm deep with 6mm radius corners.

Battery Hazard label  (160mm x 44mm x 2)

Set of 2 labels on a sheet.
Each label is 160mm wide x 44mm deep with 2mm radius corners.

Battery Hazard label  (160mm x 90mm x 2)

Set of 2 labels on a sheet.
Each label is 160mm wide x 90mm deep with 2mm radius corners.

CableWorld Solar PV 10mm² DC Cable 500m Black

The solar Cable is TUV and EN certified and designed for the connection of photovoltaic panels. This extremely versatile single conductor cable is designed to meet the varying needs of the solar industry. Highly flexible, compatible with all brands of connectors and suitable for wet, damp and humid applications.

Features:

• Nominal Insulation thickness: 0.7 mm
• Nominal sheath: 0.8mm
• High volume resistance even after long term period in
  water
• Resistance against UV, Water, Ozone, Fluids, Oil, Salt & General Weathering
• Electron Beam Cross Linked
• Halogen Free, Flame Retardant, Low Smoke Emission
• Expected cable life > 25 years
• Water Resistant AD 8 to meet as per IEC 60364-5-51 & IEC
  a60529
• RoHS compliant as per EU norms

CableWorld Solar PV 10mm² DC Cable 5m Black

The solar Cable is TUV and EN certified and designed for the connection of photovoltaic panels. This extremely versatile single conductor cable is designed to meet the varying needs of the solar industry. Highly flexible, compatible with all brands of connectors and suitable for wet, damp and humid applications.

Features:

• Nominal Insulation thickness: 0.7 mm
• Nominal sheath: 0.8mm
• High volume resistance even after long term period in
  water
• Resistance against UV, Water, Ozone, Fluids, Oil, Salt & General Weathering
• Electron Beam Cross Linked
• Halogen Free, Flame Retardant, Low Smoke Emission
• Expected cable life > 25 years
• Water Resistant AD 8 to meet as per IEC 60364-5-51 & IEC
  a60529
• RoHS compliant as per EU norms

CableWorld Solar PV 16mm² DC Cable 1000m Black

The solar Cable is TUV and EN certified and designed for the connection of photovoltaic panels. This extremely versatile single conductor cable is designed to meet the varying needs of the solar industry. Highly flexible, compatible with all brands of connectors and suitable for wet, damp and humid applications.

Features:

• Nominal Insulation thickness: 0.7 mm
• Nominal sheath: 0.9mm
• High volume resistance even after long term period in water
• Resistance against UV, Water, Ozone, Fluids, Oil, Salt & General Weathering
• Electron Beam Cross Linked
• Halogen Free, Flame Retardant, Low Smoke Emission
• Expected cable life > 25 years
• Water Resistant AD 8 to meet as per IEC 60364-5-51 & IEC60529
• RoHS compliant as per EU norms

CableWorld Solar PV 4mm² DC Cable 100m Black 

The solar Cable is TUV and EN certified and designed for the connection of photovoltaic panels. This extremely versatile single conductor cable is designed to meet the varying needs of the solar industry. Highly flexible, compatible with all brands of connectors and suitable for wet, damp and humid applications.

Features:

• Nominal Insulation thickness: 0.7 mm
• Nominal sheath: 0.8mm
• High volume resistance even after long term period in water
• Resistance against UV, Water, Ozone, Fluids, Oil, Salt & General Weathering
• Electron Beam Cross Linked
• Halogen Free, Flame Retardant, Low Smoke Emission
• Expected cable life > 25 years
• Water Resistant AD 8 to meet as per IEC 60364-5-51 & IEC60529
• RoHS compliant as per EU norms

CableWorld Solar PV 4mm² DC Cable 25m BLACK

The solar Cable is TUV and EN certified and designed for the connection of photovoltaic panels. This extremely versatile single conductor cable is designed to meet the varying needs of the solar industry. Highly flexible, compatible with all brands of connectors and suitable for wet, damp and humid applications.

Features:

• Nominal Insulation thickness: 0.7 mm
• Nominal sheath: 0.8mm
• High volume resistance even after long term period in water
• Resistance against UV, Water, Ozone, Fluids, Oil, Salt & General Weathering
• Electron Beam Cross Linked
• Halogen Free, Flame Retardant, Low Smoke Emission
• Expected cable life > 25 years
• Water Resistant AD 8 to meet as per IEC 60364-5-51 & IEC60529
• RoHS compliant as per EU norms

CableWorld Solar PV 4mm² DC Cable 50m BLACK

The solar Cable is TUV and EN certified and designed for the connection of photovoltaic panels. This extremely versatile single conductor cable is designed to meet the varying needs of the solar industry. Highly flexible, compatible with all brands of connectors and suitable for wet, damp and humid applications.

Features:

• Nominal Insulation thickness: 0.7 mm
• Nominal sheath: 0.8mm
• High volume resistance even after long term period in water
• Resistance against UV, Water, Ozone, Fluids, Oil, Salt & General Weathering
• Electron Beam Cross Linked
• Halogen Free, Flame Retardant, Low Smoke Emission
• Expected cable life > 25 years
• Water Resistant AD 8 to meet as per IEC 60364-5-51 & IEC60529
• RoHS compliant as per EU norms

CableWorld Solar PV 4mm² DC Cable 500m Black

The solar Cable is TUV and EN certified and designed for the connection of photovoltaic panels. This extremely versatile single conductor cable is designed to meet the varying needs of the solar industry. Highly flexible, compatible with all brands of connectors and suitable for wet, damp and humid applications.

Features:

• Nominal Insulation thickness: 0.7 mm
• Nominal sheath: 0.8mm
• High volume resistance even after long term period in water
• Resistance against UV, Water, Ozone, Fluids, Oil, Salt & General Weathering
• Electron Beam Cross Linked
• Halogen Free, Flame Retardant, Low Smoke Emission
• Expected cable life > 25 years
• Water Resistant AD 8 to meet as per IEC 60364-5-51 & IEC60529
• RoHS compliant as per EU norms

CableWorld Solar PV 6mm² DC Cable 100m Black

The solar Cable is TUV and EN certified and designed for the connection of photovoltaic panels. This extremely versatile single conductor cable is designed to meet the varying needs of the solar industry. Highly flexible, compatible with all brands of connectors and suitable for wet, damp and humid applications.

Features:

• Nominal Insulation thickness: 0.7 mm
• Nominal sheath: 0.8mm
• High volume resistance even after long term period in water
• Resistance against UV, Water, Ozone, Fluids, Oil, Salt & General Weathering
• Electron Beam Cross Linked
• Halogen Free, Flame Retardant, Low Smoke Emission
• Expected cable life > 25 years
• Water Resistant AD 8 to meet as per IEC 60364-5-51 & IEC60529
• RoHS compliant as per EU norms

CableWorld Solar PV 6mm² DC Cable 500m Black

The solar Cable is TUV and EN certified and designed for the connection of photovoltaic panels. This extremely versatile single conductor cable is designed to meet the varying needs of the solar industry. Highly flexible, compatible with all brands of connectors and suitable for wet, damp and humid applications.

Features:

• Nominal Insulation thickness: 0.7 mm
• Nominal sheath: 0.8mm
• High volume resistance even after long term period in water
• Resistance against UV, Water, Ozone, Fluids, Oil, Salt & General Weathering
• Electron Beam Cross Linked
• Halogen Free, Flame Retardant, Low Smoke Emission
• Expected cable life > 25 years
• Water Resistant AD 8 to meet as per IEC 60364-5-51 & IEC60529
• RoHS compliant as per EU norms

CableWorld Solar PV 6mm² DC Cable 500m RED

The solar Cable is TUV and EN certified and designed for the connection of photovoltaic panels. This extremely versatile single conductor cable is designed to meet the varying needs of the solar industry. Highly flexible, compatible with all brands of connectors and suitable for wet, damp and humid applications.

Features:

• Nominal Insulation thickness: 0.7 mm
• Nominal sheath: 0.8mm
• High volume resistance even after long term period in water
• Resistance against UV, Water, Ozone, Fluids, Oil, Salt & General Weathering
• Electron Beam Cross Linked
• Halogen Free, Flame Retardant, Low Smoke Emission
• Expected cable life > 25 years
• Water Resistant AD 8 to meet as per IEC 60364-5-51 & IEC60529
• RoHS compliant as per EU norms

ComAp MainsPro G99 Mains Protection Relay

MainsPro is a G99 protection relay for mains-to-parallel applications, including renewable energy sources such as photovoltaic plants.

It provides adjustable voltage, frequency and loss of mains protections to safeguard both the distribution network and the generators.

If you are generating power in parallel to the mains, you will need ‘loss of mains’ protection. This is essential to avoid supplying your electricity into an islanded grid, which may lead to possible equipment damage or safety issues.

KEY FEATURES:

• Unrivalled safety for installers and service engineers
• Compatibility with DNO testing procedures
• True RMS measurement for increased accuracy, reliable evaluation of failures
• Vector Shift and Rate of change of frequency (ROCOF) protections available in one unit to choose the best fit to secure your site
• Symmetrical components for better detection of voltage asymmetry failures
• Two stage settings of voltage and frequency protections to cover short term as well as long term disturbances with appropriate priority
• Free assignment of 5 relay outputs allows wide range of signaling and trip methods
• Free assignment of 4 binary switches to remotely change operation of the unit
• Adjustable time delay of Automatic fault reset which avoids necessity of on-site personnelUniversal power supply 8-40 VDC, 85-265 VAC, 110-370 VDC
• Selectable voltage range 120/230/400 VAC with over-range to 156/290/520 VAC makes the unit independent on application
• Supports 3-phase and 1-phase applications
• Last 5 trips record providing evidence of cause of trip

ComAp MainsPro G99TT (with seal)

MainsPro G99TT is a G99 compliant type tested mains protection relay for on-grid parallel-to-mains photovoltaic applications. It provides adjustable voltage, frequency and loss of mains protections to safeguard both the distribution network and the generators.

The G99 functions were added as a result of UK adopting EU Commission Regulation on harmonising network standards known as Requirements for Generators (RfG) into GB Distribution and Grid Codes.

The main change is moving from Vector to ROCOF (Rate of Change of Frequency) protection to detect how quickly the system frequency is changing by continuously sampling the frequency of mains voltage. Now ROCOF is the only approved method for Loss of Mains.

The unit has protection settings set during the manufacturing process. Some of the settings cannot be changed and some are locked in a way that only authorized personnel can change them.

KEY FEATURES:

• Easy set-up via a user-friendly interface
• Full ENA EREC G99 Type Tested compliance
• True RMS measurement
• Required for all new installations in the UK from 27 April 2019
• Wide power supply and measurement range
• Simple wiring with detachable connectors
• Remote binary communication
• Suitable for standard DIN rail installation
• Advanced frequency, voltage and loss of mains protections
• History track (last 5 events)
• Integrated mechanical lock to secure your setting
• Breaker failure protection and watchdog 
• Resistance to frequency jumps
• Two stage settings of voltage and frequency protections
• Support of 3-phase and 1-phase applications
• Voltage protection settings can be adjusted only by authorised personnel
• IP20 Protection
• 2-year warranty

Dunext EMS Data management

EMS box is used for data information display, storage and operation control of energy storage system. It is a lightweight on-site control and energy management system, which is mainly used for the application scenarios of battery energy storage equipment. Through the application of the system, it can achieve the role of on-site multi-storage equipment power distribution, multi-energy (loads, photovoltaic, wind power, generators, etc.) complementary monitoring and energy management.

Technical Specifications :

• Controlling function: Peak shaving, Backup mode, Smooth PV output
• Communication Protocol Ethernet: Modbus-TCP
• Dimensions (WxHxD): 320×500×60 mm 
• Installation Method: Indoor, hanging

Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover

Emlite Bi-Directional meter provides three different readings that scroll across the screen automatically; these readings are Import, Export and NET values. NET Values should be used as Feed-In Tariff readings when used with DC-coupled storage or Hybrid (PV and Battery) inverters. Please check the Installation Manual file for details on how to install this BiDirectional meter correctly!

This meter meets the “Bi-directional meter” criteria as listed in ‘Guidance for generators: Co-location of electricity storage facilities with renewable generation supported under the Renewables Obligation or Feed-in Tariff scheme's (Version 2)’ document released by OFGEM.

Emlite 3-Phase generation meter EMP 100A (1000 pulse/kWh)

The Emlite EMP1 three phase metering range offers high quality accurate meters that are suitable for direct connected domestic, commercial, Solar PV and light industrial applications.

The EMP1.AV is an entry model of the metering range but it’s of solid high quality construction and benefits from features normally found in more expensive metering brands.

This is a one pulsed output model; it can provide data for collection by an energy management system or AMR data logger. These pulses are output via the meter ’s auxiliary terminals. The output conforms to IEC 62053 -31.

KEY FEATURES:

• Three Phase 100A Rated
• Nominal Voltage: 3 x 230V
• Compact modern design
• Clear easy to read 8 digit LCD with specific symbols for different quantities
• 4 quadrant power measurement (Import and Export, Active and Reactive Energy)
• Optional Power Quality Information – Volts, Current, Power etc.
• Optical communications port
• Accuracy Class A or B (MID) [active energy] and Cl 2 [reactive energy]
• Fully MID approved
• Includes extended terminal cover
• Solid brass terminals
• Pulsed output
• IP54 Protection

Emlite ECA2 1 Phase Meter 100A

The Emlite ECA2 single phase meter provides a compact solution for many metering applications. Fully approved in accordance with the Measuring Instruments Directive (MID), this highly accurate meter may be used for utility billing or micro-generation metering.

KEY FEATURES:

• Fully MID approved
• Measures Import and Export Active Energy
• Easy-to-read LCD Display
• Optical port for configuration or meter reading
• Pulsed Output version available

EnviroGuard Galvanized Solar Bird Mesh Roll 30M

Ideal for use in screening solar panels to prevent birds of all species from accessing the underside of the panel.

Pest bird infestations that remain unchecked can cause significant damage to the solar panel, roof covering and rainwater drainage system as well as drastically reducing the solar panel output because of obliteration from pigeon faecal matter.

The system is fast and easy to install, no gluing or drilling necessary.

The wire mesh is supplied in rolls.

Mesh cutting technique:

• Use heavy gauge side cutters to cut the mesh to required size.
• Cut it into six-foot lengths and straighten before getting onto the roof. Then, using a length of 2" X 4" timber, bend up the bottom inch of mesh to about 30 degrees. This 'kick-out' helps to lock the mesh firmly into place against the solar panel.

KEY FEATURES:

• Galvanized Steel Welded Mesh
• Dimensions: 25mm X 12.5mm on a 200mm X 30m roll
• Saves time and cost in cutting down wider rolls of mesh
• No need to pierce roof or solar panel
• The solar panel mesh clip holds the weldmesh securely against the solar panel

EnviroGuard PVC Coated Solar Bird Mesh Roll 30M

Ideal for use in screening solar panels to prevent birds of all species from accessing the underside of the panel.

Pest bird infestations that remain unchecked can cause significant damage to the solar panel, roof covering and rainwater drainage system as well as drastically reducing the solar panel output because of obliteration from pigeon faecal matter.

The system is fast and easy to install, no gluing or drilling necessary.

The hot dipped galvanised mesh with black pvc coat is suitable for coastal areas or if black finish has been specified.

The wire mesh is supplied in rolls.

Mesh cutting technique:

• Use heavy gauge side cutters to cut the mesh to required size
• Cut it into six-foot lengths and straighten before getting onto the roof. Then, using a length of 2" X 4" timber, bend up the bottom inch of mesh to about 30 degrees. This 'kick-out' helps to lock the mesh firmly into place against the solar panel.

KEY FEATURES:

• Hot dipped galvanised /pvc coated for additional protection
• Black Mesh
• Dimensions: 25mm X 12.5mm on a 200mm X 30m roll
• Saves time and cost in cutting down wider rolls of mesh
• No need to pierce roof or solar panel
• The solar panel mesh clip holds the weldmesh securely against the solar panel to deter bird entry
  
  
  

EnviroGuard Solar Panel Speed Clip 30mm (Pack of 150) - Black

Enviroguard’s solar panel bird protection system delivers reliable, drill-free solar panel protection from birds, helping to prevent nesting, reduce debris, and maintain system performance. The mesh forms a secure barrier beneath panels without affecting warranties or maintenance access.

The 30mm black Solar Speed Clip provides a quick, tool-free way to attach the mesh, ideal for frames without a mounting lip. A smart, installer-friendly solution for durable and discreet bird protection for solar panels. 

KEY FEATURES:

• Fast, tool-free installation
• No drilling: protects manufacturer warranties
• UV-stabilised black polycarbonate: strong and discreet
• Reliable solar panel protection from birds
• Installer-friendly design: saves time on-site  

Note: EnvironGuard recommends using 5-6 Solar Speed Clips per meter for the most secure and reliable fix.

EnviroGuard Solarguard Mesh Clip Push Fit (Box 60)

The clips are part of an innovative system designed specifically to keep birds out from under solar arrays. Patent-pending clips bind the mesh to the panels without drilling holes or damaging the system.

They are designed to fit solar panel bird meshes and work in a similar way to a cable tie.

FEATURES:

• The solar mesh clips are supplied in box of 60
• Clips are UV stable and won't scratch anodised frames of solar panels
• Clips recommended every 450mm (18 inches) 2 clips on short edge; 3 clips on long edge

INSTALLATION STEPS:

GoodWe GM330 3-Phase Smart Energy Meter

Compact and DIN-rail mountable, the GM330 weighs approximately 0.2 kg and is suitable for residential and commercial installations. It provides precise energy data to optimise system performance and enhance energy management.

KEY FEATURES:

• Three-phase smart energy meter for accurate grid monitoring
• Measures both energy import and export
• Supports export limitation with compatible GoodWe inverters
• Real-time energy data monitoring
• High accuracy metering (0.5% class)
• Compact DIN-rail mount design
• Suitable for residential and commercial installations
• Lightweight construction (approx. 0.2 kg)
• Reliable and durable build quality
• IP20 rating (indoor)
• Dimension (W/D/H): 72/72/85mm

GoodWe Lynx D Floor Base

Provides a secure floor-mounting solution for GOODWE Lynx Home D Storage System. Up to 4 battery modules can be stacked per ground base. A second base is required for 5 or more modules.

Dimensions (H x W x D): 40 x 700 x 170 mm.

GoodWe Lynx D wall bracket

Provides a secure wall-mounting solution for GOODWE Lynx Home D Storage System. Up to 4 battery modules can be stacked per wall mount. A second wall mount is required for 5 or more modules.

Dimensions (H x W x D): 120x 700 x 170 mm.

GoodWe Smart Dongle EZLink 3000

Ezlink3000 is a compact, lightweight communication device that connects compatible inverters to GoodWe’s Smart Energy Management System (SEMS) for reliable data monitoring. With flexible installation options and support for both WiFi and LAN, it’s designed for easy deployment, indoors or outdoors, even in demanding environmental conditions.

Key features:

• Compact size and lightweight design
• Flexible installation for a variety of sites and layouts
• WiFi and LAN connectivity options
• Connects inverters to GoodWe SEMS for monitoring and data logging
• Supports inverter paralleling function (for compatible models)
• Outdoor-capable design for harsh conditions
• Wide operating tolerance for temperature and humidity
• Bluetooth Communication: Bluetooth 5.1
• Dimensions (WxHxD): 48 x 153 x 32 mm
• IP65

Goodwe Battery Lifting Accessory (Pair)

This accessory provides safe lifting, handling, and installation of GoodWe All-In-One battery systems. It provides installers with a secure grip point, helping to reduce the risk of injury and preventing damage to the battery unit during transport and positioning.

The lifting handles are compatible with both batteries and inverters.

Haier 4G Communication Module

The Haier HC-U4G Communication Module, designed for Smart Cube Energy Controllers. This USB module enables reliable 4G communication for remote monitoring and system control. IP66-rated for safe indoor and outdoor use.

KEY FEATURES:

• Support 4G communication
• IP66 protection rating
• Plug & play, easy to use
• Support 4G: FDD-LTE / TDD-LTE
• USB Connection Interface
• Dimensions(W / H / D):  52 / 112 / 33 mm

Haier Installation Kit for Ground-mounted

The Haier InsK-G installation kit is designed for ground mounting of the Smart Cube Energy Storage System. It is suitable for configurations combining one inverter (controller) with up to six battery modules.

Haier Installation Kit for Wall-mounted

The Haier InsK W installation kit is designed for wall mounting of the Smart Cube Energy Storage system. It is suitable for configurations combining one inverter (controller) with up to two battery modules.

Huawei WLAN-FE Dongle, WLAN or Ethernet or Hotspot

The Huawei Smart Dongle A-05 (AP+STA) is a communication accessory designed for Huawei solar inverters. With plug-and-play installation via USB, it can connect to up to 10 inverters, ensuring efficient system monitoring. It supports both WLAN and Fast Ethernet connections.

KEY FEATURES:

• Plug & Play - Support max. 10 devices
• Supports WLAN & Fast Ethernet (FE) and 3rd-party monitoring system communication
• Support data encryption for transmission, ensuring data safety
• Operating temperature range :–30°C to +65°C
• Dimensions (W x H x D) : 146 mm x 48 mm x 33 mm
• IP rating: IP65
• 2 years warranty
  
  

Note: This item is also compatible with SUN2000-30/36/40KTL-M3 inverters.

IMO 16A DC Isolator - 2 Pole (Single string) IP66 Enclosed, 800 VDC

FEATURES:

• 2 Pole (1 string)
• 16A 800 VDC
• IP66 Enclosure
• Grey Body with Black switch
• Switching times of less than 5ms
• IMO patented "Safelock" function
• Dimensions (mm):180x98x107

IMO Solar Isolators (SI) are specifically designed to interrupt the DC/AC Inverter from the solar panel array. Photovoltaic installations have to be equipped with DC Isolators in accordance with IEC 60364-7-712.

IMO 16A DC Isolator - 4 Pole (Two Strings) IP66 Enclosed, 800 VDC

FEATURES:

• 4 Pole (2 string)
• 16A 800VDC
• IP66 Enclosure
• Grey Body with Black switch
• Switching times of less than 5ms
• IMO patented "Safelock" function
• Dimensions (mm):180x98x107

IMO Solar Isolators (SI) are specifically designed to interrupt the DC/AC Inverter from the solar panel array. Photovoltaic installations have to be equipped with DC Isolators in accordance with IEC 60364-7-712.

IMO 25A DC Isolator - 2 Pole (Single String) IP66 Enclosed, 600 VDC

FEATURES:

• 2 Pole (1 string)
• 25A 600VDC
• IP66 Enclosure
• Grey Body with Black switch
• Switching times of less than 5ms
• IMO patented "Safelock" function
• Dimensions (mm):180x98x107

IMO Solar Isolators (SI) are specifically designed to interrupt the DC/AC Inverter from the solar panel array. Photovoltaic installations have to be equipped with DC Isolators in accordance with IEC 60364-7-712.

IMO 16A DC Isolator - 4 Pole (Two Strings) IP66 Enclosed, 600 VDC

FEATURES:

• 4 Pole (2 string)
• 25A 600VDC
• IP66 Enclosure
• Grey Body with Black switch
• Switching times of less than 5ms
• IMO patented "Safelock" function
• Dimensions (mm):180x98x107

IMO Solar Isolators (SI) are specifically designed to interrupt the DC/AC Inverter from the solar panel array. Photovoltaic installations have to be equipped with DC Isolators in accordance with IEC 60364-7-712.

IMO 32A DC Isolator - 4 Pole (Two Strings) IP66 Enclosed, 600 VDC

FEATURES:

• 4 Pole (2 strings)
• 32A 600 VDC
• IP66 Enclosure
• Grey Body with Black switch
• Switching times of less than 5ms
• IMO patented "Safelock" function
• Dimensions (mm):180x98x107

IMO Solar Isolators (SI) are specifically designed to interrupt the DC/AC Inverter from the solar panel array. Photovoltaic installations have to be equipped with DC Isolators in accordance with IEC 60364-7-712.

IMO 40A DC Isolator - 4 Pole (Two Strings) IP66 Enclosed, 600 VDC

FEATURES:

• 4 Pole (2 strings)
• 40A 600 VDC
• IP66 Enclosure
• Grey Body with Black switch
• Switching times of less than 5ms
• IMO patented "Safelock" function
• Dimensions (mm):180x98x107

IMO Solar Isolators (SI) are specifically designed to interrupt the DC/AC Inverter from the solar panel array. Photovoltaic installations have to be equipped with DC Isolators in accordance with IEC 60364-7-712.

IMO 48A DC Isolator Nema 4X - 8 Pole (Four Strings) IP67 Enclosed, 600 VDC

FEATURES:

• 8 Pole (4 string)
• 48A 600 VDC
• IP67 Enclosure
• Grey Body with Black switch
• Switching times of less than 5ms
• IMO patented "Safelock" function
• Dimensions (mm):240x176x156

IMO Solar Isolators (SI) are specifically designed to interrupt the DC/AC Inverter from the solar panel array. Photovoltaic installations have to be equipped with DC Isolators in accordance with IEC 60364-7-712.

IMO 55A DC Isolator Nema 4X - 8 Pole (Four Strings) IP67 Enclosed, 800 VDC, Special Handle

FEATURES:

• 8 Pole (4 string)
• 55A 800 VDC
• IP67 Enclosure
• Grey Body with Black switch
• Switching times of less than 5ms
• IMO patented "Safelock" function
• Dimensions (mm):240x176x156

IMO Solar Isolators (SI) are specifically designed to interrupt the DC/AC Inverter from the solar panel array. Photovoltaic installations have to be equipped with DC Isolators in accordance with IEC 60364-7-712.

IMO 65A DC Isolator - 4 Pole (Two Strings) IP66 Enclosed, 600 VDC

FEATURES:

• 4 Pole (2 string)
• 65A 600 VDC
• IP66 Enclosure
• Grey Body with Black switch
• Switching times of less than 5ms
• IMO patented "Safelock" function
• Dimensions (mm):240x176x156

IMO Solar Isolators (SI) are specifically designed to interrupt the DC/AC Inverter from the solar panel array. Photovoltaic installations have to be equipped with DC Isolators in accordance with IEC 60364-7-712.

IMO 76A DC Isolator Nema 4X - 8 Pole (Four Strings) IP67 Enclosed, 700 VDC

FEATURES:

• 8 Pole (4 string)
• 76A 700 VDC
• IP67 Enclosure
• Grey Body with Black switch
• Switching times of less than 5ms
• IMO patented "Safelock" function
• Dimensions (mm):240x176x156

IMO Solar Isolators (SI) are specifically designed to interrupt the DC/AC Inverter from the solar panel array. Photovoltaic installations have to be equipped with DC Isolators in accordance with IEC 60364-7-712.

Stag 100A AC Isolator - 4 Pole IP65 Enclosed

Stag’s 4 Pole 100A AC Isolator is made from high-quality flame-retardant materials, and sealed to IP65 rating, making it tough, durable and suitable for most applications.

With safety in mind, this isolator only opens in the OFF position and includes additional earth and neutral connections. The 4th pole can be used to switch a neutral as it is an Early Make Late Break. The isolator enclosures come with multiple gland knockout holes, making them a versatile option.

KEY FEATURES:

• 4 Poles
• 100A
• 230-440V
• IP65 Protection Rating (enclosure)
• EN 60947-3 Compliant
• Multiple Gland Knockouts
• Lockable Rotary Handle
• Flame Retardant
• External Mounting Points
• Additional Earth Connection
• Interlocked Enclosure Lid
• Dimensions: 240x160x120 mm

Stag 20A AC Isolator - 4 Pole IP65 Enclosed

Stag’s 4 Pole 20A AC Isolator is made from high-quality flame-retardant materials, and sealed to IP65 rating, making it tough, durable and suitable for most applications.

With safety in mind, this isolator only opens in the OFF position and includes additional earth and neutral connections. The 4th pole can be used to switch a neutral as it is an Early Make Late Break. The isolator enclosures come with multiple gland knockout holes, making them a versatile option.

KEY FEATURES:

• 4 Poles
• 20A
• 230-440V
• IP65 Protection Rating (enclosure)
• EN 60947-3 Compliant
• Multiple Gland Knockouts
• Lockable Rotary Handle
• Flame Retardant
• External Mounting Points
• Additional Earth Connection
• Interlocked Enclosure Lid
• Dimensions: 125x100x85mm

Stag 32A AC Isolator - 4 Pole IP65 Enclosed

Stag’s 4 Pole 32A AC Isolator is made from high-quality flame-retardant materials, and sealed to IP65 rating, making it tough, durable and suitable for most applications.

With safety in mind, this isolator only opens in the OFF position and includes additional earth and neutral connections. The 4th pole can be used to switch a neutral as it is an Early Make Late Break. The isolator enclosures come with multiple gland knockout holes, making them a versatile option.

KEY FEATURES:

• 4 Poles
• 32A
• P65 Protection Rating (enclosure)
• EN 60947-3 Compliant
• Multiple Gland Knockouts
• Lockable Rotary Handle
• Flame Retardant
• External Mounting Points
• Additional Earth Connection
• Interlocked Enclosure Lid
• Dimensions: 125x100x85mm

Stag 40A AC Isolator - 4 Pole IP65 Enclosed

Stag’s 4 Pole 40A AC Isolator is made from high-quality flame-retardant materials, and sealed to IP65 rating, making it tough, durable and suitable for most applications.

With safety in mind, this isolator only opens in the OFF position and includes additional earth and neutral connections. The 4th pole can be used to switch a neutral as it is an Early Make Late Break. The isolator enclosures come with multiple gland knockout holes, making them a versatile option.

KEY FEATURES:

• 4 Poles
• 40A
• 230-440V
• P65 Protection Rating (enclosure)
• EN 60947-3 Compliant
• Multiple Gland Knockouts
• Lockable Rotary Handle
• Flame Retardant
• External Mounting Points
• Additional Earth Connection
• Interlocked Enclosure Lid
• Dimensions: 175x115x100mm

Stag 63A AC Isolator - 4 Pole IP65 Enclosed

Stag’s 4 Pole 63A AC Isolator is made from high-quality flame-retardant materials, and sealed to IP65 rating, making it tough, durable and suitable for most applications.

With safety in mind, this isolator only opens in the OFF position and includes additional earth and neutral connections. The 4th pole can be used to switch a neutral as it is an Early Make Late Break. The isolator enclosures come with multiple gland knockout holes, making them a versatile option.

KEY FEATURES:

• 4 Poles
• 63A
• 230-440V
• IP65 Protection Rating (enclosure)
• EN 60947-3 Compliant
• Multiple Gland Knockouts
• Lockable Rotary Handle
• Flame Retardant
• External Mounting Points
• Additional Earth Connection
• Interlocked Enclosure Lid
• Dimensions: 175x115x100mm

Jean Muller NH Fuse-link 160A for KETO-00

NH fuse-links, utilization category gG with combi indicator and isolated gripping lugs according to IEC 60269 respectively DIN EN 60269-1 and DIN VDE 0636-2 with a rated voltage of AC500V.

Jean Muller NH Fuse-link 80A for KETO-00

NH fuse-links, utilization category gG with combi indicator and isolated gripping lugs according to IEC 60269 respectively DIN EN 60269-1 and DIN VDE 0636-2 with a rated voltage of AC500V.

Jean Muller KETO-00 Fuse-switch-disconnector

Add robust and secure battery disconnection with the KETO range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety.

The KETO-00 needs two fuses at the appropriate rating to be added.

Size these based on the maximum battery current with a safety factor applied.

KEY FEATURES:

• Maximum DC current = 160A
• Poles: 3
• Rated operating voltage Ue: 690V
• Overall width: 106mm
• System size: 195mm
• Depth: 84mm
• Terminals: M8 lugs with cable area from 25-95mm2
• Wall mountable

Jean Muller Keto NH Fuse-link 125A for KETO-00

125A fuse link to be used with the Keto-00 disconnector switch. NH fuse-links with combi indicator and isolated gripping lugs according to IEC 60269 respectively DIN EN 60269-1 and DIN VDE 0636-2 with a rated voltage of AC500V.

The Keto-00 requires two fuses.

Product Weight: 0.17 kg

Jean Muller Keto NH Fuse-link 40A for KETO-00

40A fuse link to be used with the Keto-00 disconnector switch.

NH fuse-links with combi indicator and isolated gripping lugs according to IEC 60269 respectively DIN EN 60269-1 and DIN VDE 0636-2 with a rated voltage of AC500V.

The Keto-00 requires two fuses.

Jean Muller Keto NH Fuse-link 80A for Keto 1

NH fuse-links with combi indicator and isolated gripping lugs according to IEC 60269 respectively DIN EN 60269-1 and DIN VDE 0636-2 with a rated voltage of AC500V.