Roof Flashings

Dektite Aluminium Multicable Solar Flashing (Metal Roof)

Dektite® Premium - Perfect for Flashing Pipes and Cables on Metal Roofs.

The multi-application flashing in a highly durable EPDM or silicone, edged with a flexible aluminium band, flashes pipes and cables on metal roofs. The square base fits most roof profiles.

FEATURES:

• Cable External: 4 - 8 mm
• Roof Pitch: Any
• Base size: 139 X 139 mm

Dektite Deks Fast Flash 280mm x 5m Roll - Black

DEKS Fast Flash Self Adhesive Lead Alternative.

KEY FEATURES:

• Fast Flash is ideal for any application requiring a quick and secure flashing solution.
• Fast Flash can be installed on roofs with a slope of min 5° and on almost all roof materials.
• Fast Flash is environmentally friendly and easy to install as the reverse is self-adhesive, as well as being flexible and very workable.
• If painting is required or where water is likely to travel from copper or bitumen onto Fast Flash use 100% acrylic low sheen exterior paint.

Dektite Fixing Kit (metal roof)

This Kit is for fixing Dektites on the metal roofs. One Kit fixes 2 to 3 Dektite DFE101BM.

This Kit has the following parts:

• 25 x self-drilling screws
• 25 x colour caps (silver)
• 1 x 75ml tube of silicone sealant
• 1 x fixing instruction leaflet

On the back page of the instruction leaflet is a table which indicates which kit is required for each size of flashing.

Dektite Lead Multicable Solar Flashing (Tiled or Slate)

The speciality flashing for solar PV cables on tile or slate roofs.

Allows up to 10 cables to be taken effectively through any tile or slate roof - Avoids risk of damage or pressure on cables by isolating from tiles or slates and provides a complete weatherproof seal. Black EPDM cone, features Nu-Lead® acrylic coated lead base.

FEATURES:

• Pipe External: 4 - 8 mm
• Roof Pitch: Any
• Base size: 490 X 410 mm
• Base Type: Nu - Lead

Genius Roof - Flat Tiled Kit

The SolarFlash™ system is a simple and effective waterproof solution to refitting roofing slates or tiles around a roof bracket when installing solar photovoltaic, or other, panels.

By installing with SolarFlash™, it can help you to ensure that all your installations are MCS 012 compliant.

SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training.

Why you need SolarFlash™

The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates.

This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant.

Parts included are:

• 1 x Small SolarFlash (H 235mm by W 251mm)
• 1 x Weather stop foam
• 2 x Shims

Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible. Non compatible components are: SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005.

For any specific clarification, please let us know.

Genius Roof - Hallhooks for Fitting Slates (10 Pack)

The Hallhook™ is a permanent, secret and fail safe device that should be used when replacing a broken slate.

KEY FEATURES:

• For general repair
• Patented design
• After solar panel bracket mounting
• After roof light/window installation
• After installing slate vents

Genius Roof - Slate Kit for New Build

The SolarFlash™ system is a simple and effective waterproof solution to refitting roofing slates or tiles around a roof bracket when installing solar photovoltaic panels. Installing with SolarFlash™ helps to ensure that all installations are MCS 012 compliant.

SolarFlash™ is very easy to install, leaves the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training.

Parts included are:

• 1 x Large SolarFlash (364mm by 364mm)
• 1 x Weather stop Foam
• 2 x Shims

Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible.Non compatible components are: : SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005. For any specific clarification, please let us know.

Genius Roof - Slate Refit Kit

The SolarFlash™ system is a simple and effective waterproof solution to refitting roofing slates or tiles around a roof bracket when installing solar photovoltaic panels. Installing with SolarFlash™ helps to ensure that all installations are MCS 012 compliant.

SolarFlash™ is very easy to install, leaves the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training.

This product is suitable for existing Slate Roof.

Parts included are:

• 1 x SolarFlash™
• 3 x Hallhooks™ & 1 x Hookpull™
• 2 x Shims (packings)
• 1 x Foam insert
• 3 x Compensation hooks
• Installation instructions

Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible.Non compatible components are: : SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005. For any specific clarification, please let us know.

Genius Roof – SpeedFlash Kit

The SpeedFlash® streamlines solar installations on slate roofs with a quick, no-‘drill through slate’ method that preserves roof integrity. Ideal for 18″+ slates, it minimizes the need for slate removal. Not for 4″ headlap composite slates.

Parts included are:

• 1 x SpeedFlash Base & Cap
• 1 x SpeedFlash Foam
• 1 x SpeedFlash Support Spring
• 2 x (In each box of 40) SpeedFlash Shield
• 2 x Shim (Packing)