K2 D-Dome 6.10 System
System for mostly east-west elevation
Solutions for all roof coverings. Double exposure support solution. Clearly ballast-optimised system based on the latest wind tunnel standards. Secure anchoring with fixed connection for roofs < 10° and low load reserves.
Optimum utilization of roof area, i.e. more modules can be installed on the roof since no shading distances between the rows have to be considered.
Scope of application: Flat roofs < 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs
Fastening type/roof fixture: Sheet thickness for aluminium/steel: min. 0.5 mm
- Ballasted and no roof penetration for inclination: = 3°
- With fixed connection at inclination with Dome FixPro: > 3°
Requirements:
- Permissible module dimensions (L×W×H): 1448-2390 × 950-1170 × 30-50mm
- Minimum system size S-Dome: 4 modules
Minimum distance to the edge of the roof: 600mm
Inclination Angle: 10°
Material:
- Peak, SD, mounting rail, MidPlate, EndPlate, Connector, Porter, MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
- Windbreaker: Magnelis
- Mat S protective mat: EPDM
- Small parts: stainless steel (1.4301) A2-70
