K2 BasicRail System
All-rounder with only 4 installation steps. Floating with controlled thermal linear expansion.
The SpeedRail mounting system for photovoltaic systems has been specially developed for trapezoidal sheet metal roofs.
- The proven long rail system for trapezoidal sheet metal applications as well as floating with controlled thermal linear expansion.
- All-rounder with only 4 installation steps - also suitable for high load
Scope of application: Trapezoidal sheet roof
Fastening type / roof fixture: Insertion mounting into SpeedClips and screws in the roofing
Requirements:
- Sheet thickness: = 0.4 mm steel and = 0.5 mm aluminium
- Sandwich panel: Approval from manufacturer required
- Crest width: At least 22 mm
- Flush are surrounding the bore hole: Ø = 20 mm
Material:
- SpeedRail: Aluminium (EN AW-6063 T66; 0,64 kg/m
- SpeedClip: Fibreglass-reinforced polyamide with EPDM
SpeedRail dimensions:(W×H×L) 63 mm × 22,5 mm × 2.25/3.30/4.40/5.50 m
SpeedClip dimensions: (see drawing)
Second rail layer: SingleRail
