K2 MultiRail System
Roof connection and module railing in one single component. Short rail or a flexible component in various lengths available.
The MultiRail mounting system for photovoltaic assemblies was developed specifically for trapezoidal sheet metal. It blends roof connection with module railing in one single component.
- Easy and proven – as a short rail or a flexible component in various lengths
- Quick planning with less material and greater effectiveness
Scope of application: Pitched roofs, 5 - 75°, with trapezoidal sheet or sandwiched trapezoidal sheet
Fastening type / roof fixture: Fastened with self-tapping sheet screws
Requirements: Sheet thickness: > 0.5 mm (steel and aluminium)
- Sheet thickness: = 0.4 mm steel and = 0.5 mm aluminium
- Sandwiched trapezoidal sheet: Approval from manufacturer required
- Crest width: At least 22 mm
- Maximum crest width: Independent
Material: Aluminium (EN AW-6063 T66); EPDM
Dimension:
- W × H [mm]: 39 × 35
- Lengths [mm]: MultiRail 10: 100; MultiRail 25: 250
Second Rail Layer: SingleRail