System for south orientation of the modules
Solutions for all roof coverings. Single exposure developer solution. Clearly ballast-optimised system based on the latest wind tunnel standards. Secure anchoring with fixed connection for roofs < 10° and low load reserves.
Scope of application: Flat roofs < 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs
Fastening type/roof fixture: Sheet thickness for aluminium/steel: min. 0.5 mm
- Ballasted and no roof penetration for inclination: = 3°
- With fixed connection at inclination with Dome FixPro: > 3°
Requirements:
- Permissible module dimensions (L×W×H): 1448-2390 × 950-1170 × 30-50mm
- Minimum system size S-Dome: 2 modules
- Clamping at the short module side permitted
Minimum distance to the edge of the roof: 600mm
Inclination Angle: 10°
Material:
- Peak, SD, mounting rail, MidPlate, EndPlate, Connector, Porter, MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
- Windbreaker: Magnelis
- Mat S protective mat: EPDM
- Small parts: stainless steel (1.4301) A2-70
