Sunsynk 7kW All-In-One Elite 1Ph Hybrid Inverter
The Sunsynk 7kW Elite Hybrid Inverter is a single-phase, low-voltage solar and battery
inverter for residential and light commercial energy storage installations.
Part of the Sunsynk Elite stackable energy storage platform, it manages power between solar PV, battery storage and the grid to help maximise self-consumption, support backup power and enable controlled export. The 7kW model provides 7,000W AC output, dual MPPT inputs and up to 14,000W maximum PV access power for solar oversizing.
Designed
for use with Sunsynk low-voltage LiFePOâ‚„ battery storage, this inverter offers
a compact, modular solution for homes seeking lower energy bills, time-of-use
tariff optimisation and improved energy independence.
About the Inverter
- 7.0 kW single-phase hybrid inverter, 2MPPTÂ
- 200% PV oversizingÂ
- Maximum Input Current per MPPT: 32AÂ
- Start-up input voltage: 125V
- Max European efficiency: 96.5%Â
- Inverter Standard Warranty: 10 yearsÂ
Battery Input Data:
- Battery Type:Â LiFePOâ‚„
- Battery Voltage: 40 - 60V
- Number of Battery Input: 1
- Supports up to 6 Elite battery modules per stack
Advanced control and communications:
- LCD & LED display
- RS232, RS485 & CAN communication
- Optional Wi-Fi, Bluetooth, LAN, 4G or GPRS monitoring
- Supports self-consumption, backup and export control
- Firmware updates supported
Enhanced safety:
- Type II SPD on DC & AC
- Integrated DC switch
- Anti-islanding and residual current detection
- Reverse polarity, over-current and over-voltage protection
- Short-circuit, thermal and insulation monitoring
- DC component monitoring
- Optional AFCI
- IP65 protection
Compatibility:
- The Sunsynk 5kW Elite Hybrid Inverter is designed for use with Sunsynk low-voltage LiFePOâ‚„ battery storage, including the Sunsynk Elite 5.12kWh stackable battery modules. For an Elite stackable system, the inverter, battery modules, Power Distribution Unit (PDU)Â and Base Unit should be installed and commissioned together. The PDU manages battery communication, BMS integration, DC isolation and protection, power distribution, and overall system control.
- Battery-ready installation without batteries should be confirmed with Sunsynk or your supplier before sale, as the Elite platform is primarily designed as a matched inverter-and-battery storage system.
About the Sunsynk Elite All-in-One Energy Storage System
The Sunsynk Elite is a compact, modular low-voltage all-in-one energy storage system, combining a hybrid inverter, LiFePOâ‚„ battery modules, PDU and base unit in a clean stackable design.
Built for residential solar and battery installations, it supports self-consumption, backup power and time-of-use tariff optimisation.
Key Benefits:
- Integrated hybrid solar and battery storage platform
- Modular battery design for scalable capacity
- Smart energy management functionality
- EPS backup support
- Remote monitoring and diagnostics
- Installer-friendly setup and commissioning - floor-mounted, stackable system with minimal wiring for faster installation
Ideal Applications:
- New builds and retrofit solar battery projects
- Homes targeting higher self-consumption
- Time-of-use tariff optimisation
- Residential backup power applications
- Projects needing capacity growth over time
Power and capacity:
- Inverter sizes: 3.6kW, 5kW and 7kW single-phase
- Battery modules: 5.12kWh LiFePOâ‚„
- Scalable storage per inverter: 5.12–30.72kWh
- Battery stacks per inverter: 1 stack
- Up to 6 battery modules per stack
- Each Sunsynk Elite battery stack requires:1 × Elite PDU Unit and 1 × Elite Base Unit
Energy management:
- Solar self-consumption optimisation
- Peak shaving and load shifting
- Scheduled battery charging
- Grid export limitation
- Backup load prioritisation
- Smart tariff optimisation
- Generator auto-start compatibility
The system balances solar generation, battery storage and grid import/export to help improve efficiency and reduce electricity costs.
Protection & Connectivity:
- Type II SPD (AC & DC)
- Integrated DC switch
- IP65-rated enclosure
- Optional AFCI
- RS232, RS485, CAN and remote monitoring
| Inverter Power Range (kW) | 4.1kW - 10kW |
| Inverter Phase | 1 |
| Battery / System Model | Sunsynk Elite |
| Brand | Sunsynk |
| Rated Power (W) | 7000 |
| Max DC Power (W) | 11200 |
| Total No. of Strings | 4 |
| No. of MPP Trackers | 2 |
| MPPT Voltage Range / Rated Input Voltage (V) | 150-425 / 370 |
| Start-up Input Voltage (V) | 125 |
| Max. Input Voltage (V) | 500 |
| Max. input current per MPPT | 32A |
| European Efficiency (%) | 96.5 |
| Integrated DC Switch | Yes |
| Inverter IP Rating | IP65 |
| Depth (mm) | 256 |
| Height (mm) | 399.2 |
| Width (mm) | 720 |
| Grid Connection Standards (G98/G99/G100) | G99 |
| Warranty Period | 10 Years |
| Product Weight (Kg) | 31.6 |