K2 S-Dome 6.10 System

System for south orientation of the modules 

Solutions for all roof coverings. Single exposure developer solution. Clearly ballast-optimised system based on the latest wind tunnel standards. Secure anchoring with fixed connection for roofs < 10° and low load reserves.

Scope of application: Flat roofs < 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

Fastening type/roof fixture: Sheet thickness for aluminium/steel: min. 0.5 mm

• Ballasted and no roof penetration for inclination: = 3°
• With fixed connection at inclination with Dome FixPro: > 3°

Requirements: 

• Permissible module dimensions (L×W×H): 1448-2390 × 950-1170 × 30-50mm
• Minimum system size S-Dome: 2 modules
• Clamping at the short module side permitted 

Minimum distance to the edge of the roof: 600mm

Inclination Angle: 10°

Material:

• Peak, SD, mounting rail, MidPlate, EndPlate, Connector, Porter, MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
• Windbreaker: Magnelis
• Mat S protective mat: EPDM
• Small parts: stainless steel (1.4301) A2-70