GoodWe 6kW All In One ESA Hybrid Inverter with Dual Tracker DC & AFCI

• 6 kW single-phase hybrid inverter, 2MPPT
• 200% PV oversizing
• Maximum Input Current per MPPT: 20A
• Low start input voltage: 50V
• Max European efficiency: 97.0%
• Inverter Standard Warranty: 10 years
• Commercial extension options: up to 20 years

Backup:

• Switching time to backup < 4ms
• 63A bypass to support for full backup loads
• Up to 2 times overload for 10s

Advanced control and communications:

• Micro-grid and AC-coupling operations possible
• Self-use, ToU, Peak-shaving, and up to 6 smart operation modes
• Firmware update with SolarGo App possible
• Ready for AI-EMS

Enhanced safety:

• AI-driven AFCI 3.0
• Inverter with SPD Type II (DC and AC)
• Storage 6-layer safety protection
• IP66 protection

Compatibility:

• GoodWe ESA 3–10K must be installed with GoodWe BAT5 or BAT8 batteries. Mixing 5 kWh and 8 kWh modules in one stack is supported.
• Battery-ready (no batteries) is not permitted. ESA inverter and batteries are interdependent and must be commissioned together.

Compact, elegantly designed, IP66-rated all-in-one energy storage system that integrates hybrid inverter, LFP battery stack, UPS-grade backup switching, and battery enclosure.

Operates reliably indoors or outdoors in any weather conditions. Pre-wired and modular for fast installation.

Ideal applications:

• New builds and retrofits seeking whole-home backup and bill reduction
• Homes targeting high self-consumption with large PV arrays
• Projects needing capacity growth over time

Power and capacity:

• Inverter sizes: 3, 3.6, 5, 6, 8, 10 kW single-phase
• Battery modules: 5 kWh or 8 kWh LFP
• Scalable storage: 5–48 kWh per system (up to 6 modules per stack)
• Mix-and-match old and new battery modules for expansions

Multiple inverter configuration:

• Up to 6 inverters (up to 288kWh total storage capacity)
• On-grid & Backup parallel possible; AC-coupling scenario supported

Backup and performance:

• <4 ms UPS-level switchover (built-in) for whole-home backup
• 1C charge and discharge for fast cycling

Safety and reliability:

• LFP chemistry with high cycle stability
• Six-layer safety architecture, including AI-driven arc fault interruption (AFCI 3.0)
• Cell- and module-level monitoring

Smart energy features:

• Smart home integration with multi-protocol comms
• On-grid, off-grid, microgrid and AC-coupled scenarios

Scope of delivery:

• Inverter Box: CT 120A/40mA and connection cable; Battery base; Smart dongle; Adjustable feet; Communication cable; Decorative covers; Handles; Anti-tip bracket; PV terminals, AC terminals, other miscellaneous parts.
• Battery Box: Battery; Plugs and screws
• Smart Meter
• “How to Install the ESA 3–10 kW from GoodWe Solar Academy”