Already a customer? Login

S-ROCK 15° FLAT ROOF SYSTEM

K2 Mounting Systems

The solution for quick single-sided elevation

The S-Rock System helps you save valuable work time, transport weight, and volume. This system optimizes all aspects of preparation and handling. Save up to 30 % installation time. The result is an innovative flat-roof mounting system that will shape the future of the market. All components can be transported on pallets.

  • Ultra quick and easy mounting
  • One component with integrated ballast tray and cable management solution
No additional pre-assembly
One universal clamp for all modules
Aerodynamically optimised as a result of wind tunnel testing

TECHNICAL DATA

Scope of application: 

Flat roofs < 5° with film and bitumen covering or concrete

Fastening type/roof fixture: 

On-roof with potential ballast; no roof penetration

Requirements: 

Permissible module dimensions (L × W × H): 1638 -1685 × 982 -1001 × 30-50 mm

Technical specifications:
  • Thermal separation after 8 adjacent or consecutive modules
  • Minimum clearance to roof edge 700 mm (350 mm to other obstructions)
  • Row spacing, fixed: approx. 1.7/1.6 m
Inclination angle: 15°
Material:
  • Aluminium: S-Rock, Windbreaker (EN AW-5754 H22/H32) + Module clamps (EN AW-6063 T66)
  • Building protection mat with or without aluminium lining (PUR-bound rubber granules)
  • Small parts: Stainless steel A2-70

S-Rock 15° Flat Roof System

S-Rock 15° Flat Roof System

S-ROCK 15° FLAT ROOF SYSTEM

K2 Mounting Systems

The solution for quick single-sided elevation

The S-Rock System helps you save valuable work time, transport weight, and volume. This system optimizes all aspects of preparation and handling. Save up to 30 % installation time. The result is an innovative flat-roof mounting system that will shape the future of the market. All components can be transported on pallets.

  • Ultra quick and easy mounting
  • One component with integrated ballast tray and cable management solution
No additional pre-assembly
One universal clamp for all modules
Aerodynamically optimised as a result of wind tunnel testing

TECHNICAL DATA

Scope of application: 

Flat roofs < 5° with film and bitumen covering or concrete

Fastening type/roof fixture: 

On-roof with potential ballast; no roof penetration

Requirements: 

Permissible module dimensions (L × W × H): 1638 -1685 × 982 -1001 × 30-50 mm

Technical specifications:
  • Thermal separation after 8 adjacent or consecutive modules
  • Minimum clearance to roof edge 700 mm (350 mm to other obstructions)
  • Row spacing, fixed: approx. 1.7/1.6 m
Inclination angle: 15°
Material:
  • Aluminium: S-Rock, Windbreaker (EN AW-5754 H22/H32) + Module clamps (EN AW-6063 T66)
  • Building protection mat with or without aluminium lining (PUR-bound rubber granules)
  • Small parts: Stainless steel A2-70

12 Item(s)

Set Descending Direction

Grid List