Huawei Smart Optimiser MERC-1300W-P for Three-Phase Inverters, Long Cable
The Huawei Smart Optimiser MERC-1300W-P gets the maximum power out of the solar modules. The 2-in-1 optimiser can noticeably increase the efficiency of the system: 1 optimiser serves 2 solar modules. It is compatible with various modules. Pairing with the inverter is done extremely quickly and easily.
The Huawei Smart Optimiser handles an input current of 20A and complies with overvoltage category II. The enormously high efficiency of 99.5% is impressive.
It suits the following three-phase inverters: SUN2000 30/36/40KTL-M3; SUN2000-50KTL-M3 ; SUN2000 12/15/17/20/25K-MB0.
For PV modules with long power cables, the PV modules can be installed vertically or horizontally.
Overvoltage category: II-P is that it is a so-called
Module accurate arc detection
Physical view of the plant in less than 5 seconds
Dimensions (W x H x D): 149 x 104 x 48.8 mm
Input/Output Connector: connector: Original Stäubli MC4
Protection class: IP68
Notes:
The SUN2000-(600W-P, 450W-P2) cannot be used together with the MERC-1300W-P.
For the MERC-1300W-P optimiser, one MPPT of the inverter can connect to only one PV string.
The capacity difference between PV strings connected to the same inverter must be less than or equal to 2 kW.
Partial configuration is not allowed. All PV modules must be connected to optimisers. Otherwise, serious consequences may occur, and the resulting device damage is not covered by the warranty.
