Huawei Smart Optimiser MERC-1100W-P, Long Cable | Alternergy

Huawei Smart Optimiser MERC-1100W-P for 3Ph Inverters, Long Cable

Inverters, Huawei SUN2000 40KTL-M3 3ph inverter, SUN2000-40KTL-M3, Alternergy

Huawei SUN2000 40KTL-M3 3ph Inverter

Huawei Smart Optimiser MERC-1300W-P, Long Cable | Alternergy

Huawei Smart Optimiser MERC-1300W-P for Three-Phase Inverters, Long Cable

Huawei Smart Optimiser MERC-1100W-P for 3Ph Inverters, Long Cable

Availability: 1080 due 02/10/2024
Product Code:
MERC-1100W-P Long Cable
Add to

Huawei | Alternergy

Huawei Smart Optimiser MERC-1100W-P for 3Ph Inverters, Long Cable


The Huawei Smart Optimiser MERC-1100W-P gets the maximum power out of the solar modules. The 2-in-1 optimiser can noticeably increase the efficiency of the system: 1 optimiser serves 2 solar modules. It is compatible with various modules. Pairing with the inverter is done extremely quickly and easily.

The Huawei Smart Optimiser handles an input current of 20A and complies with overvoltage category II. The enormously high efficiency of 99.5% is impressive.

It suits the following three-phase inverters: SUN2000 30/36/40KTL-M3;  SUN2000-50KTL-M3 ;  SUN2000  12/15/17/20/25K-MB0.

For PV modules with long power cables, the PV modules can be installed vertically or horizontally.



 

 

KEY FEATURES:

  • Input wire length:1.3 m (+/-)
  • Output wire length:0.1 m (+), 2.9 m (-)
  • One-fits-all element
  • Rated Input DC Power: 1100 W
  • Compatible inverters:SUN2000 30/36/40KTL-M3;  SUN2000-50KTL-M3 ;  SUN2000  12/15/17/20/25K-MB0
  • Max. Efficiency: 99.5 %
  • Weighted efficiency: 99.0 %
  • Max. Input current: 20A
  • Overvoltage category: II-P is that it is a so-called
  • Module accurate arc detection
  • Physical view of the plant in less than 5 seconds
  • Dimensions (W x H x D): 149 x 104 x 48.8 mm
  • Input/Output Connector: connector: Original Stäubli MC4
  • Protection class: IP68

 

Notes:

  1. The SUN2000-(600W-P, 450W-P2) cannot be used together with the MERC-1100W-P.
  2. For the MERC-1100W-P optimiser, one MPPT of the inverter can connect to only one PV string.
  3. The capacity difference between PV strings connected to the same inverter must be less than or equal to 2 kW.
  4. Partial configuration is not allowed. All PV modules must be connected to optimisers. Otherwise, serious consequences may occur, and the resulting device damage is not covered by the warranty.
More Information
Brand Huawei
Product Weight (Kg) 1.0
Accessory Phase 3
Module Power (W) ≤ 1100

Available stock 0
Incoming units 1080 due 02 October 2024