Already a customer? Login

K2 Mounting Systems

S-DOME SMALL SYSTEM

The S-Dome Small elevation fixture for photovoltaic assemblies was developed specifically for trapezoidal sheet metal. The roof connection is based on the MultiRail mounting railing.

-   For a roof inclination of up to 15° on trapezoidal sheet metal
-   Economical in terms of materials and transportation; clever connections and strong holding power
-   The perfect combination of the all-round MultiRail component and load-optimised, slim elevations

TECHNICAL DATA

Side-view S-Dome Small System
 

S-Dome Small

Scope of application: 

Flat or pitched roofs ≤ 15° with trapezoidal sheet metal roofing

Fastening type/roof fixture: 

Attached with drilling screws in trapezoidal sheets, parallel to high bead

Requirements:

 

 

 

-   Sheet thickness for aluminium/steel: min. 0.5 mm
-   Tensile strength for aluminium: 165 N/mm²
-   Tensile strength for steel: according to approval min. S235 in acc. w/ DIN EN 10025-1
-   Crest width: min. 22 mm
-   Crest spacing: independent
Technical specifications: Thermal separation after a max. of 13.5 m: min. 30 mm to max. 150 mm
Inclination angle

10°

Material:
-   Mounting rails, Dome SD Small, Dome S1000 Small, FlexClamp Small: Aluminium (EN AW-6063 T66/ EN AW-6082 T6); EPDM
-   Small parts: Stainless steel (1.4301) A2

S-Dome Small System

S-Dome Small System

K2 Mounting Systems

S-DOME SMALL SYSTEM

The S-Dome Small elevation fixture for photovoltaic assemblies was developed specifically for trapezoidal sheet metal. The roof connection is based on the MultiRail mounting railing.

-   For a roof inclination of up to 15° on trapezoidal sheet metal
-   Economical in terms of materials and transportation; clever connections and strong holding power
-   The perfect combination of the all-round MultiRail component and load-optimised, slim elevations

TECHNICAL DATA

Side-view S-Dome Small System
 

S-Dome Small

Scope of application: 

Flat or pitched roofs ≤ 15° with trapezoidal sheet metal roofing

Fastening type/roof fixture: 

Attached with drilling screws in trapezoidal sheets, parallel to high bead

Requirements:

 

 

 

-   Sheet thickness for aluminium/steel: min. 0.5 mm
-   Tensile strength for aluminium: 165 N/mm²
-   Tensile strength for steel: according to approval min. S235 in acc. w/ DIN EN 10025-1
-   Crest width: min. 22 mm
-   Crest spacing: independent
Technical specifications: Thermal separation after a max. of 13.5 m: min. 30 mm to max. 150 mm
Inclination angle

10°

Material:
-   Mounting rails, Dome SD Small, Dome S1000 Small, FlexClamp Small: Aluminium (EN AW-6063 T66/ EN AW-6082 T6); EPDM
-   Small parts: Stainless steel (1.4301) A2

7 Item(s)

Set Descending Direction

Grid List